GETTING STARTED EN 15
Date/Time Settings
21Select CLOCK ADJ.
MONTH. DATE. YEAR 12h
JAN. 03. 2007 02 : 10 AM
SET
The date/time is recorded onto the tape at all times, but its display can be turned on or off. ( pg. 34, 35)
Perform steps 1 – 3 in “Language Settings” ( pg. 14).
1 Select “DISPLAY”, press SET or 2.
2 Select “CLOCK ADJ.”, press SET or 2.
3 Select the desired date display format, press SET or 2.
●Repeat this step to input time display format (Select from “24h” or “12h”), month, date, year, hour and minutes.
4 Press MENU.
Brightness Adjustment Of The Display
21Select
BRIGHT | ± 0 |
SET
Perform steps 1 – 3 in “Language Settings” ( pg. 14).
●To adjust the brightness of the viewfinder, pull out the viewfinder fully and set “PRIORITY” to “FINDER” ( pg. 34).
1 Select “DISPLAY”, press SET or 2.
2 Select “BRIGHT”, press SET or 2.
3 Select the appropriate brightness, press SET or 2.
4 Press MENU.
GETTING STARTED
Press 1 whenever you want to return to the previous menu screen/setting.
Viewfinder Adjustment
1 Set the Power Switch to “REC” while pressing down the Lock Button located on the switch.
2 Make sure the LCD monitor is closed and locked. Pull out the viewfinder fully.
3 Turn the Diopter Adjustment Control until the indications in the viewfinder are clearly focused.
Example:
Press 1 whenever you want to return to the previous menu screen.
Tripod Mounting
To attach the camcorder to a tripod, align the direction stud and screw to the mounting socket and stud hole on the camcorder. Then tighten the screw clockwise.
●Some tripods are not equipped with studs.
Diopter Adjustment Control
CAUTION:
When retracting the viewfinder, take care not to pinch your fingers.