32 EN MENUS FOR DETAILED ADJUSTMENT
In the following pages, [ ] refers to Factory preset settings.
Recording Menus
FUNCTION
●The following menu settings can be changed only when the Power Switch is set to “REC”.
●Each setting (except “EFFECT” and “SHUTTER”) which is set in Video Recording Menu is also applied in the D.S.C. Recording Menu.
WIPE/FADER*
( pg. 40), “Wipe or Fader Effects”
*Available only when the VIDEO/MEMORY Switch is set to “VIDEO”.
CAMERA
The following menu settings can be changed only when the Power Switch is set to “REC”.
ZOOM*
[34X]: When set to “34X” while using digital zoom, the zoom magnification will reset to 34X since digital zoom will be disengaged.
68X*: Allows you to use the Digital Zoom. By digitally processing and magnifying images, zooming is possible from 34X (the optical zoom limit), to a maximum of 68X digital magnification.
900X*: Allows you to use the Digital Zoom. By digitally processing and magnifying images, zooming is possible from 34X (the optical zoom limit), to a maximum of 900X digital magnification.
PROGRAM AE
( pg. 41), “Program AE, Effects And Shutter Effects”
EFFECT
( pg. 41), “Program AE, Effects And Shutter Effects”
EXPOSURE
( pg. 38), “Exposure Control”
W. BALANCE
( pg. 39), “White Balance Adjustment”
SHUTTER
( pg. 41), “Program AE, Effects And Shutter Effects”
*Available only when the VIDEO/MEMORY Switch is set to “VIDEO”.
TELE MACRO
[OFF]: Disables the function.
ON: When the distance to the subject is less than 1 m (3.3 ft), set “TELE MACRO” to “ON”. You can shoot a subject as large as possible at a distance of approx. 40 cm (1.4 ft).
Depending on the zoom position, the lens may go out of focus.
DIS*
OFF 
: Disables the function. (DIS disable icon appears.)
[ON]: To compensate for unstable images caused by
NOTES:
●Accurate stabilization may not be possible if hand shake is excessive, or depending on the shooting condition.
●Switch off this mode when recording with the camcorder on a tripod.
●DIS cannot be activated when “NIGHT” in “PROGRAM AE” or “STROBE” in “EFFECT” is
selected, or when LIGHT is set to on, or when SNAPSHOT is pressed.
*Available only when the VIDEO/MEMORY Switch is set to “VIDEO”.