JVC GR-D790U manual We recommend cleaning your video heads Before use, For safety and reliability

Page 3

EN 3

Read This First!

Before recording important video, be sure to make a trial recording.

Play back your trial recording to make sure the video and audio have been recorded properly.

We recommend cleaning your video heads

before use.

If you haven’t used your camcorder for awhile, the heads may be dirty. We recommend periodically cleaning the video heads with a cleaning cassette (optional).

Be sure to store your cassette tapes and camcorder in the proper environment. Video heads can become dirty more easily if your cassette tapes and camcorder are stored in a dusty area. Cassette tapes should be removed from the camcorder and stored in cassette cases. Store the camcorder in a bag or other container.

Use SP (Standard) mode for important video recordings.

LP (Long Play) mode lets you record 50% more video than SP (Standard) mode, but you may experience mosaic-like noise during playback depending on the tape characteristics and the usage environment.

So, for important recordings, we recommend using SP mode.

For safety and reliability.

It is recommended only genuine JVC batteries and accessories are used in this camcorder.

This product includes patented and other proprietary technology and will operate only with JVC Data Battery. Use the JVC BN-VF808U/VF815U/VF823U battery packs. Using generic non-JVC batteries can cause damage to the internal charging circuitry.

This camcorder is designed exclusively for the digital video cassette, SD Memory Card and MultiMediaCard. Only cassettes marked

” and memory cards marked “

or “” can be used with this unit.

SDHC Memory Card cannot be used with this camcorder.

Remember that this camcorder is not compatible with other digital video formats.

It is recommended that you use JVC brand cassette tapes.

Your camcorder is compatible with all brands of commercially available cassette tapes complying with the MiniDV standard, but JVC brand cassette tapes are designed and optimized to maximize the performance of your camcorder.

Remember that this camcorder is intended for private consumer use only.

Any commercial use without proper permission is prohibited. (Even if you record an event such as a show, performance or exhibition for personal enjoyment, it is strongly recommended that you obtain permission beforehand.)

DO NOT leave the unit

-in place of over 50°C (122°F)

-in place where humidity is extremely low (below 35%) or extremely high (80%).

-in direct sunlight.

-in a closed car in summer.

-near a heater.

The LCD monitor is made with high- precision technology. However, black spots or bright spots of light (red, green or blue) may appear constantly on the LCD monitor. These spots are not recorded on the tape. This is not due to any defect of the unit. (Effective dots: more than 99.99%)

Do not leave the battery pack attached when the camcorder is not in use and check the unit regularly whether it is working or not.

Also read “CAUTIONS” on pages 48 – 50.

Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Macintosh is a registered trademark of Apple Computer, Inc.

QuickTime is a registered trademark of Apple Computer, Inc.

Image 3
Contents Digital Still Camera D.S.C. Recording For AccessoriesLED Light Data BatteryWipe/Fader Effects Live SlowWe recommend cleaning your video heads Before use For safety and reliabilityIt is recommended that you use JVC brand cassette tapes Safety Precautions Cleaning The Camcorder User MaintenanceUSE Cleaning Cassette EN Contents Move the control lever up/down/left/right 3/4/1/2 to select Provided AccessoriesRegarding This Manual Getting Started ENEN Getting Started How to open the LCD monitorPower-linked operation IndexÄOther Parts ConnectorsÂIndicators Controls# Sound 12 B I T 1555 IndicationsLCD Monitor/Viewfinder 169 LPDE C 8VOLUME Volume Level Indicator  pg 9Time Code  pgDuring Video Playback During D.S.C. Playback I T / M IGrip Adjustment How To Attach The Lens CapHow To Attach The Shoulder Strap To restore the accuracy of the battery Power indicatorAbout Batteries Information Language SettingsData Battery System Maximum continuous recording timeDate/Time Settings Viewfinder AdjustmentTripod Mounting Tape Check TAPE’S Erase Protection TABCassette holder cover Please Format Wide ModeCard Error Loading/Unloading a Memory CardQuick Review Basic RecordingEN Video Recording Tape Remaining TimeJournalistic Shooting Video Recording ENZooming Interface ShootingManual recording is possible by setting various functions Auto/Manual ModeAuto Mode a Manual Mode MTo control the speaker volume Still PlaybackHDV Press Snapshot EN Video PlaybackVariable Shuttle Search Playback SnapshotMake sure all units are turned off If using a VCR, go to . If not, go to stepConnections To a TV Or VCR Video Playback ENBeam Effective Area indoor use Installing The BatteryControl Buttons And FunctionsPlayback Zoom Slow-Motion PlaybackPlayback Special Effects Frame-By-Frame PlaybackStored in the memory card Check CARD’S Write Protection SwitchEN D.S.C. Recording Approximate Number of Storable ImagesRemoving On-Screen Display Auto Playback Of ImagesIndex Playback Of Files C. Playback ENTo Remove Protection Resetting The File NameEN Additional Features for D.S.C Protecting FilesTo delete the currently displayed file Setting Print Information Dpof SettingDeleting Files To Print All Still Images One Print For EachTo Reset The Number Of Prints Initializing a Memory CardNumber Of Prints For Video Playback Menu For Video and D.S.C. Recording MenusRecording Menus EN Menus for Detailed AdjustmentWind CUT REC ModeSound Mode Gain UPDATE/TIME Demo ModeCAM Reset On ScreenNarration Clock ADJ REC ModePlayback Menus OFF / LCD / LCD/TVLED Light EN Features for RecordingLED Light Press Slow during recording or playbackManual Focus Motor Drive ModeTo reset to Auto Focus Snapshot Record Still Image On TapeSelect FUNCTION, press SET or Select EXPOSURE, press SET or Open the LCD monitor fully Set the Power Switch to RECExposure Control Iris Lock Use this function in the following situationsWhite Balance Adjustment Backlight CompensationSpot Exposure Control Wipe Or Fader Effects AdjustmentClassic NightSepia MonotonePerform steps 1 6  pg Dubbing To a VCREditing To use this camcorder as a playerCopy Protected Equipped With a DV ConnectorDigital Dubbing To use this camcorder as a recorderEN Editing Using USB cableUsing DV cable ComputerTo hear the dubbed sound during playback Audio DubbingInsert Editing Editing ENNo power is supplied EN TroubleshootingTroubleshooting EN AC Adapter Battery PacksUsing Household AC Plug Adapter EN CautionsDo not Memory CardsLCD Monitor Main UnitSerious malfunctioning How To Handle a CD-ROMAbout moisture condensation CONDENSATION, Operation Paused Please WaitReferences CamcorderTerms Contents Limited Liability JVC Software License AgreementHow to handle a CD-ROM System Requirements Software Installation Windows To USB Camcorder Connector USB Cable Connecting the USB cableFor example, create a new folder in the My Pictures folder Dpof setting dataStill images Folders in the memory card appearPlaying Back Files on the PC Windows Connections Macintosh Viewing the Contents of a Memory Card MacintoshPlaying Back Files on the PC Macintosh Macintosh Windows Disconnecting the USB cableVictor Company of Japan, Limited M7D1