JVC GR-D790U manual Still Playback, Hdv, To control the speaker volume

Page 21
To start playback, press 6.

 

 

 

VIDEO PLAYBACK EN 21

Normal Playback

 

NOTES:

 

 

 

The playback picture can be viewed in the LCD

 

VIDEO/ VOL. +/–

monitor, viewfinder or on a connected TV.

 

MEMORY

Lock Button

( pg. 23)

BLANK

If Stop mode continues for 5 minutes when

 

6

 

 

power is supplied from a battery, the camcorder

 

¡

 

shuts off automatically. To turn the camcorder on

 

 

 

again, push back and pull out the viewfinder

 

 

Power

again or close and re-open the LCD monitor.

 

 

When a cable is connected to the AV connector,

 

 

Switch

1

 

the sound is not heard from the speaker.

MENU

 

 

 

 

7

Speaker

 

HDV

 

 

 

1 Load a cassette. ( pg. 16)

Appears when pictures recorded in the HDV

format are detected. The pictures in the HDV

2 Set the VIDEO/MEMORY Switch to

format cannot be played back with this

camcorder.

“VIDEO”.

3 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

SET

The above screen (referring to the control lever ( pg. 7)) will be displayed for approx. 3 seconds on the LCD Monitor.

Still Playback

Pauses during video playback.

1)Press 6 during playback.

2)To resume normal playback, press 6 again.

If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged.

RECORDING & PLAYBACK

Operation

To select

6Move the control lever up.

7Move the control lever down.

¡Move the control lever right.

1Move the control lever left.

4

5 To stop playback, press 7.

During Stop mode, press 1 to rewind, or ¡ to fast-forward the tape.

Press SET to display the guide operation screen.

To control the speaker volume

Slide the Power Zoom Lever (VOL. +/–) towards “+” to turn up the volume, or towards “–”to turn down the volume.

Image 21
Contents Digital Still Camera D.S.C. Recording For AccessoriesWipe/Fader Effects Data BatteryLive Slow LED LightWe recommend cleaning your video heads Before use For safety and reliabilityIt is recommended that you use JVC brand cassette tapes Safety Precautions Cleaning The Camcorder User MaintenanceUSE Cleaning Cassette EN Contents Regarding This Manual Provided AccessoriesGetting Started EN Move the control lever up/down/left/right 3/4/1/2 to selectPower-linked operation How to open the LCD monitorIndex EN Getting StartedÂIndicators ConnectorsControls ÄOther PartsLCD Monitor/Viewfinder Indications169 LP # Sound 12 B I T 1555During Video Playback During D.S.C. Playback 8VOLUME Volume Level Indicator  pg 9Time Code  pgI T / M I DE CGrip Adjustment How To Attach The Lens CapHow To Attach The Shoulder Strap To restore the accuracy of the battery Power indicatorAbout Batteries Data Battery System Language SettingsMaximum continuous recording time InformationDate/Time Settings Viewfinder AdjustmentTripod Mounting Tape Check TAPE’S Erase Protection TABCassette holder cover Card Error Wide ModeLoading/Unloading a Memory Card Please FormatEN Video Recording Basic RecordingTape Remaining Time Quick ReviewZooming Video Recording ENInterface Shooting Journalistic ShootingAuto Mode a Auto/Manual ModeManual Mode M Manual recording is possible by setting various functionsTo control the speaker volume Still PlaybackHDV Variable Shuttle Search EN Video PlaybackPlayback Snapshot Press SnapshotConnections To a TV Or VCR If using a VCR, go to . If not, go to stepVideo Playback EN Make sure all units are turned offControl Installing The BatteryButtons And Functions Beam Effective Area indoor usePlayback Special Effects Slow-Motion PlaybackFrame-By-Frame Playback Playback ZoomEN D.S.C. Recording Check CARD’S Write Protection SwitchApproximate Number of Storable Images Stored in the memory cardIndex Playback Of Files Auto Playback Of ImagesC. Playback EN Removing On-Screen DisplayEN Additional Features for D.S.C Resetting The File NameProtecting Files To Remove ProtectionDeleting Files Setting Print Information Dpof SettingTo Print All Still Images One Print For Each To delete the currently displayed fileTo Reset The Number Of Prints Initializing a Memory CardNumber Of Prints For Video Playback Menu For Video and D.S.C. Recording MenusRecording Menus EN Menus for Detailed AdjustmentSound Mode REC ModeGain UP Wind CUTCAM Reset Demo ModeOn Screen DATE/TIMEPlayback Menus Clock ADJ REC ModeOFF / LCD / LCD/TV NarrationLED Light EN Features for RecordingPress Slow during recording or playback LED LightTo reset to Auto Focus Motor Drive ModeSnapshot Record Still Image On Tape Manual FocusExposure Control Iris Lock Open the LCD monitor fully Set the Power Switch to RECUse this function in the following situations Select FUNCTION, press SET or Select EXPOSURE, press SET orWhite Balance Adjustment Backlight CompensationSpot Exposure Control Wipe Or Fader Effects AdjustmentSepia NightMonotone ClassicEditing Dubbing To a VCRTo use this camcorder as a player Perform steps 1 6  pgDigital Dubbing Equipped With a DV ConnectorTo use this camcorder as a recorder Copy ProtectedUsing DV cable Using USB cableComputer EN EditingInsert Editing Audio DubbingEditing EN To hear the dubbed sound during playbackNo power is supplied EN TroubleshootingTroubleshooting EN Using Household AC Plug Adapter Battery PacksEN Cautions AC AdapterLCD Monitor Memory CardsMain Unit Do notAbout moisture condensation How To Handle a CD-ROMCONDENSATION, Operation Paused Please Wait Serious malfunctioningReferences CamcorderTerms Contents Limited Liability JVC Software License AgreementHow to handle a CD-ROM System Requirements Software Installation Windows To USB Camcorder Connector USB Cable Connecting the USB cableStill images Dpof setting dataFolders in the memory card appear For example, create a new folder in the My Pictures folderPlaying Back Files on the PC Windows Connections Macintosh Viewing the Contents of a Memory Card MacintoshPlaying Back Files on the PC Macintosh Macintosh Windows Disconnecting the USB cableVictor Company of Japan, Limited M7D1