34 EN MENUS FOR DETAILED ADJUSTMENT
DISPLAY
The “DISPLAY” settings (except “CLOCK ADJ.”, “16:9 OUTPUT” and “BRIGHT”) are effective only for shooting.
ON SCREEN
LCD: Keeps the camcorder’s display (except the date, time and time code) from appearing on the connected TV screen.
[LCD/TV]: Makes the camcorder’s display appear on screen when the camcorder is connected to a TV.
DATE/TIME
[OFF]: The date/time does not appear.
ON: The date/time is always displayed.
●The date indication can also be turned on/off by pressing the DISPLAY Button on the remote control. ( pg. 23, 42)
CLOCK ADJ.
pg. 15, “Date/Time Settings”
TIME CODE*
[OFF]: Time code is not displayed.
ON: Time code is displayed on the camcorder and on the connected TV. Frame numbers are not displayed during recording. ( pg. 20)
*Available only when the VIDEO/MEMORY Switch is set to “VIDEO”.
16:9 OUTPUT
To enable your tv to display images in 16:9 wide mode, set the tv screen size correctly. 4:3 TV: For TV with an aspect ratio of 4:3.
[16:9 TV]: For TV with an aspect ratio of 16:9.
BRIGHT
pg. 15, “Brightness Adjustment Of The Display”
SYSTEM
The “SYSTEM” functions which are set when the Power Switch is set to “REC” are also applied when the Power Switch is set to “PLAY”.
LANGUAGE
/ 
/ 
/ [ENGLISH] /
FRANCAIS / ESPAÑOL / PORTUGUÊS The language setting can be changed. ( pg. 14)
MELODY
OFF: Even though not heard while shooting, shutter sound is recorded on the tape.
[ON]: A melody sounds when any operation is performed. It also activates the shutter sound effect. ( pg. 26, 37)
REMOTE
OFF: Disables the remote control operations.
[ON]: Enables the remote control operations.
PRIORITY
[LCD]: The image is displayed on the LCD monitor when the viewfinder is pulled out while the LCD monitor is opened.
FINDER: The image is displayed in the viewfinder when the viewfinder is pulled out while the LCD monitor is opened.
DEMO MODE
OFF: Automatic demonstration will not take place.
[ON]: Demonstrates certain functions such as Wipe/Fader and Effects, etc., and can be used to confirm how these functions operate.
Demonstration starts in the following cases:
●When the Menu Screen is closed after “DEMO MODE” is turned “ON”.
●With “DEMO MODE” set to “ON”, if there is no operation for about 3 minutes after the Power Switch is set to “REC”.
●Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume.
NOTES:
●If a cassette is in the camcorder, the demonstration cannot be turned on.
●“DEMO MODE” remains “ON” even if the camcorder power is turned off.
CAM RESET
[CANCEL]: Does not reset all settings to the
EXECUTE: Resets all settings to the factory- preset.