24 EN VIDEO PLAYBACK
Playback Using The Remote | Buttons And Functions | |||
|
|
|
| |
Control |
|
|
|
|
|
|
|
| |
A battery is included inside the remote control at the time of purchase.
Remove the insulation sheet before use.
Installing The Battery
The remote control uses one lithium battery (CR2025).
Pull out the battery holder by pressing the lock tab.
Lock tab
Beam Effective Area (indoor use)
When using the |
|
remote control, be |
|
sure to point it at the |
|
remote sensor. The |
|
transmitted beam’s |
|
approximate effective |
|
distance for indoor | Remote sensor |
use is 5m (16ft). |
|
NOTE:
The transmitted beam may not be effective or may cause incorrect operation when the remote sensor is directly exposed to sunlight or powerful lighting.
1Infrared beam transmitting window
The following buttons are available only when the camcorder’s Power Switch is set to “PLAY”. 2PAUSE Button
Up Button ( pg. 25)
3SLOW Rewind Button ( pg. 25)
4REW Button
Left Button ( pg. 25)
5INSERT Button ( pg. 45)
6SHIFT Button ( pg. 25)
7DISPLAY Button ( pg. 23, 42)
8SLOW Forward Button ( pg. 25)
9PLAY Button !FF Button
Right Button ( pg. 25) "A. DUB Button ( pg. 45)
#STOP Button
Down Button ( pg. 25) $EFFECT Button ( pg. 25) %EFFECT ON/OFF Button ( pg. 25)
The following buttons are available when the camcorder’s Power Switch is set to “REC”. &Zoom (T/W) Buttons
Zoom in/out ( pg. 19, 25)
(Also available with the Power Switch set to “PLAY”)
(START/STOP Button
Functions the same as the Recording Start/ Stop Button on the camcorder.
)S.SHOT Button
Functions the same as SNAPSHOT on the camcorder.
(Also available with the Power Switch set to “PLAY”)