| EDITING EN 43 | |
Dubbing To Or From A Video Unit | NOTES: | |
Equipped With A DV Connector | ● It is recommended to use the AC Adapter as | |
the power supply instead of the battery | ||
(Digital Dubbing) | pack. ( pg. 13) | |
● If a blank portion or disturbed image is played | ||
It is also possible to copy recorded scenes | back on the player during dubbing, the dubbing | |
may stop so that an unusual image is not | ||
from the camcorder onto another video unit | ||
dubbed. | ||
equipped with a DV connector. Since a digital | ● Even though the DV cable is connected | |
signal is sent, there is little, if any, image or | correctly, sometimes the image may not appear | |
sound deterioration. | in step 4. If this occurs, turn off the power and | |
| make connections again. | |
| ● If “Playback Zoom” ( pg. 25) or “Playback | |
| Special Effects” ( pg. 25) is attempted or | |
| SNAPSHOT is pressed during playback, only | |
| the original playback image recorded on the | |
| tape is output from the DV IN/OUT connector. | |
| ● When using a DV cable, be sure to use the | |
| optional JVC | |
| DV cable. |
Core filter
To DV IN/OUT
DV cable (optional)
To use this camcorder as a recorder
1 Make sure all units are turned off.
2 Connect this camcorder to a video unit equipped with a DV output connector using a DV cable as shown in the illustration.
3 Set the camcorder’s Power Switch to “PLAY”.
4 Set “REC MODE” to “SP” or “LP”. ( pg. 35)
| 5 Start playback on the player. |
To DV IN/OUT | 6 Press the Recording Start/Stop Button to |
engage the |
Video unit equipped with DV connector
To use this camcorder as a player
1 Make sure all units are turned off.
2 Connect this camcorder to a video unit equipped with a DV input connector using a DV cable as shown in the illustration.
3 Start playback on the camcorder. ( pg. 21)
4 At the point you want to start dubbing, start recording on the video unit. (Refer to the video unit’s instruction manual.)
5 To stop dubbing, stop recording on the video unit, then stop playback on this camcorder.
•The “ DV IN ” indication appears on the screen.
7 At the point you want to start dubbing, press the Recording Start/Stop Button to start
dubbing. The 
indication rotates.
8 Press the Recording Start/Stop Button
again to stop dubbing. The 
indication stops rotating.
9 Press 7 to return to the normal playback mode.
NOTE:
Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the current “SOUND MODE” setting. ( pg. 33)
COPY PROTECTED
Appears if dubbing of copyguarded signals is attempted while this camcorder is being used as a recorder.
ADVANCED FEATURES