42 EN FEATURES FOR RECORDINGS
Dubbing Still Images Recorded On A Tape To A Memory Card
Still images can be dubbed from a tape to a memory card.
1 Load a cassette. ( pg. 16)
2 Load a memory card. ( pg. 17)
3 Set “SNAP/SLOW” to the desired mode. (except “SLOW”, pg. 33, 35)
4 Set the VIDEO/MEMORY Switch to “VIDEO”.
5 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.
6 Set “[T] ➝ [M] COPY” to “ON”. ( pg. 35) 7 Press 6 to start playback.
8 At the point you want to dub, press 6 again to engage Still Playback.
9 To dub the image, press SNAPSHOT.
●The “ 
” indication appears during dubbing.
NOTE:
To use Playback Special effects with a video image you wish to dub, perform up to step 9 using the remote control. ( pg. 24)
EDITING
Dubbing To A VCR
To use this camcorder as a player
1 Following the illustration, pg. 23, “Connections To A TV Or VCR” , connect the camcorder and the VCR’s input connectors.
2 Perform steps 1 - 6 ( pg. 23)
3 At the point you want to start dubbing, start recording on the VCR. (Refer to the VCR’s instruction manual.)
4 To stop dubbing, stop recording on the VCR, then stop playback on the camcorder.
NOTES:
●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 13)
●To choose whether or not the following displays appear on the connected TV
•Date/time
Set “DATE/TIME” to “ON” or “OFF”
( pg. 35). Or, press DISPLAY on the remote control to turn on/off the date indication.
•Time code
Set “TIME CODE” to “OFF” or “ON” ( pg. 35).
•Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/ TV” ( pg. 35).