JVC GR-D790U manual Initializing a Memory Card, To Reset The Number Of Prints

30 EN ADDITIONAL FEATURES FOR D.S.C.

To Print By Selecting Still Images And			To Reset The Number Of Prints
Number Of Prints
			1 Perform steps 1 – 3 in “To Print All Still
1 Perform steps 1 – 3 in “To Print All Still
			Images (One Print For Each)” ( pg. 29).
Images (One Print For Each)” ( pg. 29).			2 Select “RESET”, press SET or 2. The
2 Select “CURRENT”,			DPOF screen appears.
	DPOF		3 Select “EXECUTE”, press SET.
press SET or 2. The DPOF
		SHEETS
screen appears.			● To cancel selection, select “RETURN”.
3 Press 1 or 2 to select	02		● The number of prints is reset to 0 for all still
				images.
the desired file.		RETURN
			CAUTION:
			While performing the above, never disconnect
			power, as this may cause the memory card to be
			corrupted.

Select

4 Press 4 or 3 to select the number indication (00), and press SET.

5 Select the number of prints		2Select
by pressing 3 to increase the
number, or 4 to decrease the
number, and press SET.
		SET
● Repeat steps 3 through 5
	DPOF
for the desired number of
		SHEETS
prints.

●The number of prints can

be set up to 15.
	02
● To correct the number of
prints, select the image
again and change the number.

NOTE:

When the image is printed from the printer, a black bar appears at the bottom of the screen. This is not a malfunction. By recording with “DIS” de-activated (
pg. 32) this can be avoided.

Initializing A Memory Card

You can initialize a memory card any time. After initializing, all files and data stored in the memory card, including those which have been protected, are cleared.

1 Perform steps 1 – 3 in “Normal Playback Of Images” (
pg. 27).

2 Press MENU.2Select

3 Select “FORMAT”, press SET or 2. The FORMAT screen

6 Select “RETURN”, press SET. The “SAVE?” appears.

DPOF

SAVE?

appears.

● Press 1 whenever you want to return to the previous menu

● If you did not change any

EXECUTE

screen.

SET

settings in step 3 through

5, the DPOF Menu

reappears.

CANCEL

4 Select “EXECUTE”,	FORMAT
press SET. The memory	ERASE ALL
card is initialized.	EXISTING DATA?

7 Select “EXECUTE”, press SET.

●To cancel selection, select “CANCEL”.

● When initialization is	EXECUTE
finished, “NO IMAGES
	CANCEL
STORED” appears.

●To cancel initialization, select “RETURN”.