JVC GR-DV2000 specifications EN31

				EN31
	BEEP		OFF	Even though not heard while shooting, shutter sound is recorded on the tape.
			BEEP	The beep sounds when the power is turned on or off, and at the beginning and end
				of recording. Also to activate the shutter sound effect ( pg. 20, 21).
			MELODY	Instead of a beep, a melody sounds when any operation is performed. It also
				activates the shutter sound effect ( pg. 20, 21).
	TALLY		OFF	The tally lamp remains off at all times.
SYSTEM			ON	The tally lamp comes on to signal the start of recording.
	DEMO		OFF	Automatic demonstration will not take place.
	MODE
			ON	Demonstrates certain functions such as Program AE with special effects, etc.,
				and can be used to confirm how these functions operate. When “DEMO
				MODE” is set to “ON” and the Menu Screen is closed, demonstration starts.
				Performing any operation during the demonstration stops the demonstration
				temporarily. If no operation is performed for more than 1 minute after that,
				the demonstration will resume.
				NOTES:
				● If a tape is in the camcorder, the demonstration cannot be turned on.
				● “DEMO MODE” remains “ON” even if the camcorder power is turned off.
				● If “DEMO MODE” remains “ON”, some functions will not be available.
				After viewing demo, set to “OFF”.
	ON		LCD	Keeps the camcorder’s display (except the date, time and time code) from
	SCREEN			appearing on the connected TV screen.
			LCD/TV	Makes the camcorder’s display appear on screen when the camcorder is
				connected to a TV.
	DATE/		OFF	The date/time does not appear.
	TIME
DISPLAY			AUTO	Displays the date/time for approx. 5 seconds in the following cases:
				scenes are recorded.
				•When the Power Switch is set from “OFF” to “ ” or “ ”.
				•When video playback starts. The camcorder displays the date/time when
				•When the date is changed during video playback.
			ON	The date/time is always displayed.
	TIME		OFF	Time code is not displayed.
	CODE		ON	Time code is displayed on the camcorder and on the connected TV. Frame
				numbers are not displayed during recording.
	CLOCK ADJ.			Allows you to set the current date and time ( pg. 11).
DSC	QUALITY			Refer to “Picture Mode Setting” ( pg. 16).
	SIZE
	UXGA
		: Factory-preset

NOTES:

● “ SYSTEM” and “ DISPLAY” functions which are set when the Power Switch is set to “ ” are also

applied when the Power Switch is set to “ ” (
pg. 41). “CLOCK ADJ.” only appears when the Power Switch is set to “ ”.

●The “ DISPLAY” settings are effective even when the Power Switch is set to “”.

●The “ON SCREEN” setting can also be changed by pressing the DISPLAY Button on the remote control

(provided) (
pg. 55, 58, 66).