JVC GR-DV2000 EN53, To Print by Selecting Still Images, NO. of Prints, To Reset The No. Of Prints

Rotate the MENU wheel to move the green frame to the image you wish to print and press it.

	EN53
MEMORY PLAY Button	TO PRINT BY SELECTING STILL IMAGES
	AND NO. OF PRINTS
	1 Perform steps 1 through 5 on pg. 52.
	Rotate the MENU wheel to selsect “SELECTED” and
	2 press it. Selection is complete. The DPOF Screen
	appears.

		MENU Wheel
		Display
E X I T		D P O F		VGA	DPOF Screen
100-DVC00021
0 1 9	0 0	0 2 0	0 0	0 2 1
0 2 2	0 0	0 2 3	0 0	0 2 4	0 0

	DPOF		Confirmation
SELECTED	–	CANCEL	Screen
		EXECUTE

3

4 Select the number of prints by rotating the MENU wheel towards “+” to increase the number, or towards “–” to decrease the number and press it. Repeat steps 3 and 4 for the desired number of prints.

•The number of prints can be set up to 15.

•To correct the number of prints, select the image again and change the number.

5 Rotate the MENU wheel upward to select “EXIT” and press it. Selection is complete. The Confirmation Screen appears.

6 Rotate the MENU wheel to select “EXECUTE” and press it. The normal playback screen appears.

•To cancel selection, rotate the MENU wheel to select “CANCEL” and press it.

To Reset The No. Of Prints . . .

.... select “RESET” in step 6 on pg. 52. The number of

prints is reset to 0 for all still images.

CAUTION:

While performing the above, never disconnect power, as this may cause the memory to be corrupted. For safety, all buttons including the Power Switch are disabled in step 5.

NOTES:

●If you load a memory card already set as shown above in a printer compatible with DPOF, it will make prints of the selected still images automatically.

●To print images recorded on a tape, first dub them to a memory card (
pg. 60).