JVC GR-DV2000 specifications EN77

EN77

SYMPTOM

30.Images on the LCD monitor appear dark or whitish.

31.The rear of the LCD monitor is hot.

32.The indicators and the image color on the LCD monitor are not clear.

33.The LCD monitor or viewfinder indications blink.

34.Colored bright spots appear all over the LCD monitor or the viewfinder.

POSSIBLE CAUSES	CORRECTIVE ACTION
30. •In places subject to low	30. • Adjust the brightness and
temperature, images become	angle of the LCD monitor
dark due to the	( pg. 18, 19).
characteristics of the LCD
monitor. When this happens,
the displayed colors differ
from those that are actually
recorded. This is not a defect
of the camcorder.
•When the LCD monitor's
fluorescent light reaches the
end of its service life, images
on the LCD monitor become
dark. Consult your nearest
JVC dealer.
31. •The light used to illuminate	31. • Close the LCD monitor to
the LCD monitor causes it to	turn it off or set the Power
become hot.	Switch to “OFF”, and let the
	unit cool down.
32. •This may occur when the	32.
surface or the edge of the	————
LCD monitor is pressed.
33. •Certain Fade/Wipe effects,	33. • Re-read the sections
certain modes of Program AE	covering Fade/Wipe effects,
with special effects, “DIS”	Program AE with special
and other functions that	effects and “DIS”
cannot be used together are	( pg. 30, 34 – 37).
selected at the same time.
34. •The LCD monitor and the	34.
viewfinder are made with
high-precision technology.
However, black spots or
bright spots of light (red,
green or blue) may appear
constantly on the LCD	————
monitor or the viewfinder.
These spots are not recorded
on the tape. This is not due
to any defect of the unit.
(Effective dots: more than
99.99 %)

CONTINUED ON NEXT PAGE