JVC GR-DV2000 specifications 20 EN, Snapshot For Video Recording, Snapshot Mode Selection

SNAPSHOT RECORDING

1 Set “CAMERA MODE” to “VIDEO” or “PS-VIDEO” in the Menu Screen (
pg. 28, 29).

2 Press SNAPSHOT.

If you press during Record-Standby . . .

..... “PHOTO” appears and a still image will be recorded

for approx. 6 seconds, then the camcorder re-enters the Record-Standby mode.

If you press during Recording . . .

..... “PHOTO” appears and a still image will be recorded

for approx. 6 seconds, then the normal recording resumes.

Motor Drive Mode

Keeping SNAPSHOT pressed provides an effect similar to serial photography. (Interval between still images: approx. 1 second)

NOTES:

20 EN

Power Switch

SNAPSHOT Button

Lock Button

RECORDING Basic Recording For Video (cont.)

Shooting	Snapshot (For Video Recording)
Mode Switch	This feature lets you record still images that look like
	photographs onto a tape.
	SNAPSHOT MODE SELECTION
	1	Set the Shooting Mode Switch to “VIDEO”, then set the
		Power Switch to “ ” while pressing down the Lock
		Button located on the switch. Pull out the viewfinder
		fully or open the LCD monitor fully.
	2 Press the MENU wheel. The Menu Screen appears.
	3	Rotate the MENU wheel to select “ CAMERA”. Press
		it and the CAMERA Menu appears.

Display

Menu Screen

SNAP MODE – P I N–UP

FRAME

FUL L

MUL T I – 4

MUL T I – 9

NEGA POS I

4 Rotate the MENU wheel to select “SNAP MODE”, then press it.

5 Rotate the MENU wheel to select the desired Snapshot mode, then press it.

Rotate the MENU wheel to select “1RETURN” and press it twice. The Menu Screen closes.

FULL Snapshot mode with no frame* √

MULTI-4 Multi-Analyzer 4

MULTI-9 Multi-Analyzer 9

PIN-UP Pin-Up mode √

NEGA POSI Nega/Posi mode* √

FRAME Snapshot mode with frame* √

● To remove the shutter sound,
“BEEP” on pg. 31.

● If Digital Zoom is used while in the “MULTI-4” or “MULTI-

9” mode, Snapshot recording will be performed with 10X

magnification.

● If Snapshot recording is not possible, “PHOTO” blinks when

SNAPSHOT is pressed.

● If Program AE with special effects (
pg. 36) is engaged,

certain modes of Program AE with special effects are disabled

during Snapshot recording. In such a case, the icon blinks.

● If SNAPSHOT is pressed when “DIS” is set to “ON”

(
pg. 29), the Stabilizer will be disabled.

● To dub images recorded on a tape to a memory card,

pg. 60.

● When shooting in the Multi-Analyzer 4 or Multi-Analyzer 9

modes, the optional flash (
pg. 83) will not light.

*There is the sound effect of a shutter closing.

√When “FULL”, “FRAME”, “PIN-UP” or “NEGA

POSI” is selected, snapshot recording will always be performed with higher quality (
pg. 24) even if “CAMERA MODE” is set to “VIDEO”.

● During playback as well, all snapshot modes except Nega/
Posi mode are available when “	COPY” is set to
“OFF” in the Menu Screen ( pg. 41).
● When a headphone set is connected to the PHONE
connector, the shutter sound is not heard from the speaker,
however it is recorded onto the tape.