50 EN | PLAYBACK Advanced Features For D.S.C. (cont.) |
Power Switch | Print Frame Deletion |
MEMORY
PLAY Button
Lock Button
MENU Wheel
Display
A print frame created on a PC can be transferred to a memory card using the provided software. Print frames that have been transferred to a memory card can be deleted when they are no longer needed.
There are 2 ways of deleting previously created print frames: by browsing through print frames individually or by deleting them all at once.
TO SELECT A PRINT FRAME BY BROWSING PRINT FRAMES STORED IN MEMORY
1 Set the Power Switch to “ 
”, while pressing down the Lock Button located on the switch. Open the LCD monitor fully or pull out the viewfinder fully.
2 Press MEMORY PLAY.
3 Press the MENU wheel. The Menu Screen appears.
4 Press the MENU wheel again. The MEMORY Menu appears.
EXIT |
| D E L E T E |
|
| ||
0 1 3 | F | 0 1 4 | F | 0 1 5 | F | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0 1 6 | F | 0 1 7 | F | 0 1 8 | F | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| FRAME |
| DEL . | |
| SEL ECT |
|
| – CANCEL | |
|
|
|
|
| EXECUTE |
|
|
|
|
|
|
|
|
|
|
|
|
DELETE Index Screen
Deletion
Confirmation
Screen
5 Rotate the MENU wheel to select “FRAME DEL.” and press it. The Sub Menu appears.
6 Rotate the MENU wheel to select “SELECT” and press it. The DELETE Index Screen appears.
7 Rotate the MENU wheel to move the green frame to the desired print frame that you wish to delete and press it. An “ 
” appears above the selected print frame.
Repeat this procedure for all print frames that you wish to delete.
To deselect a print frame, press the MENU wheel again. The “ 
” disappears.
8 Rotate the MENU wheel upward to select “EXIT” and press it. The Deletion Confirmation Screen appears.
9 Rotate the MENU wheel to select “EXECUTE” and press it. The selected print frames are deleted and the normal playback screen appears.
CAUTION:
Do not remove the memory card or perform any other operation (such as turning off the camcorder) during deletion. Also, be sure to use the provided AC Power Adapter/Charger, as the memory card may be corrupted if the battery becomes exhausted during deletion. If the memory card becomes corrupted, initialize it.
( pg. 49)
•To cancel deletion, rotate the MENU wheel to select “CANCEL” and press it.
NOTES:
●If print frames created on a PC have not been transferred to a memory card, it is not possible to delete them using these steps.
●The print frames in the camcorder’s memory cannot be deleted.