JVC GR-DV2000 specifications EN75

EN75

SYMPTOM

17.The Dissolve function does not work.

18.The Picture Wipe and Dissolve functions do not work.

19.The picture wipe function does not work.

20.Scene transition does not go as expected.

POSSIBLE CAUSES	CORRECTIVE ACTION
17. •The Sepia, Monotone or	17. • Turn off Sepia, Monotone or
Slow Shutter mode of	Slow Shutter before adding
Program AE with special	Dissolve to a scene
effects is activated.	transition ( pg. 34, 36).
•“WIDE MODE” is set to	• Set “WIDE MODE” to
“SQUEEZE” or “PS-WIDE” in	“CINEMA” or “OFF” mode
the Menu Screen.	( pg. 30).
•The previously selected	• Make sure you have selected
mode of Program AE with	the mode of Program AE
special effects was changed	with special effects you want
after the last selected scene	before starting editing
for editing was registered.	( pg. 34, 36).
18. •The last selected editing	18. • Select Picture Wipe or
scene is ending.	Dissolve before beginning
•At the end of the last selected	recording. The effects are
scene for editing, the Power	then automatically activated
Switch was set to “OFF”.	( pg. 34).
•The power is off.	• Do not turn off the
	camcorder’s power after
	setting Edit-In and Edit-Out
	points, as they will all be
	erased ( pg. 34).
	• The camcorder automati-
	cally shuts off after 5
	minutes have elapsed in the
	Record-Standby mode.
	Make sure you continue
	operations within 5 minutes
	after engaging Record-
	Standby mode ( pg. 34).
19. •The Slow Shutter mode is	19. • Disengage the Slow Shutter
activated.	mode or set “WIDE MODE”
•“WIDE MODE” is not set to	to “OFF” before preparing
“OFF”.	to use the Picture Wipe
	( pg. 30, 34, 36).
20. •When using “Picture Wipe/	20.
Dissolve” ( pg. 34), there
is a delay of a fraction of a
second between the previous
record stop-point and the
Dissolve start-point. This is	————
normal, but this slight delay
becomes especially
noticeable when shooting
fast-moving subject or during
rapid panning.

CONTINUED ON NEXT PAGE