JVC GR-DV2000 specifications 78 EN, Press Memory Play to

78 EN TROUBLESHOOTING (cont.)

SYMPTOM

35.During recording, sound cannot be heard.

36.Play, Rewind and Fast- Forward functions do not work.

37.A memory card cannot be played back.

38.The tape is moving, but there is no picture.

39.The LCD monitor image is distorted.

40.Images on the LCD monitor are jittery.

41.There is no playback picture on the connected TV.

42.Blocks of noise appear during playback, or there is no playback picture and the screen becomes blue.

43.The LCD monitor, the viewfinder and the lens have become dirty (ex. fingerprints).

	POSSIBLE CAUSES		CORRECTIVE ACTION
35. • The optional headphones are			35. •Connect the optional
not connected to the			headphones to the
headphone connector.			headphone connector
• The sound volume of the			( pg. 82, 83).
headphone connector was			•Adjust the sound volume
not adjusted appropriately.			during playback ( pg. 40).
The sound volume at this
point is the same as the level
it was adjusted to during
playback.
36. • The Power Switch is set to			36. •Set the Power Switch to
“	” or “	”.	“	” ( pg. 40).
• The D.S.C. playback mode is			•Press MEMORY PLAY to
engaged.			disengage the D.S.C.
			playback mode ( pg. 44).
37. •The Power Switch is set to			37. •Set the Power Switch to
“	” or “	”.	“	” ( pg. 44).
• The D.S.C. playback mode is			•Press MEMORY PLAY
not engaged.			( pg. 44).
38. •Your TV has AV input			38. •Set the TV to the mode or
terminals, but is not set to its			channel appropriate for
VIDEO mode.			video playback
• The cassette holder cover is			( pg. 54, 55).
open.			•Close the cassette holder
			cover ( pg. 12).
39. • During playback of the			39.
unrecorded portion, High-
speed Search and still				————
playback, LCD monitor
indications appear distorted.
This is not a defect.
40. • The speaker volume is too			40. •Turn the speaker volume
great.			down ( pg. 40).
41. • Since the analog input mode			41. •Set “S/AV INPUT” to “OFF”
is engaged, the camcorder is			in the Menu Screen
in the Record-Standby mode.			( pg. 41).
42.			42. •Clean the video heads with
	————		an optional cleaning
			cassette ( pg. 90).
43.			43. •Wipe them gently with soft
	————		cloth. Wiping strongly can
			cause damage ( pg. 80).