66 EN | USING THE REMOTE CONTROL UNIT (cont.) |
Connector cover**
To EDIT
Editing cable (provided)
To
To
Yellow to 
VIDEO IN*
To AV
Audio/Video cable (provided)
White to
AUDIO L IN
Red to
AUDIO R
IN
MAKE CONNECTIONS
Also refer to pg. 54 and 55.
1
A JVC VCR equipped with a remote pause connector . . .
... connect the editing cable to the Remote PAUSE connector.
A JVC VCR not equipped with a remote pause connector but equipped with an R.A.EDIT connector . . .
... connect the editing cable to the R.A.EDIT connector.
A VCR other than above . . .
... connect the editing cable to the remote control’s PAUSE IN connector.
2 Insert a recorded tape into the camcorder and set the
Power Switch to “ 
” while pressing down the Lock Button located on the switch.
3 Turn the VCR power on, insert a recordable tape and engage the AUX mode (refer to the VCR’s instructions).
NOTES:
●Before Random Assemble Editing, make sure the indications do not appear on the TV monitor. If they do, they will be recorded onto the new tape.
To choose whether or not the following displays appear on the connected TV . . .
To Remote PAUSE or R.A.EDIT
VCR
•Date/Time
.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the
Menu Screen ( pg. 41).
•Time Code
To PAUSE IN
TV
DISPLAY
.... set “TIME CODE” to “ON” or “OFF” in the Menu
Screen ( pg. 41).
•Playback Sound Mode, Tape Speed And Tape Running Displays
.... set “ON SCREEN” to “LCD” or “LCD/TV” in the Menu Screen ( pg. 41). Or, press DISPLAY on the remote control.
●When editing on a VCR equipped with a DV input connector, an optional DV cable can be connected instead of an
*Connect when an
**When connecting cables, open this cover.