JVC GR-DV2000 specifications Power, Charging the Battery Pack, About Batteries

Page 8

8 EN

 

GETTING STARTED

 

Battery pack

 

 

Power

 

 

 

 

 

BN-V408U,

 

 

This camcorder’s 2-way power supply system lets you

 

BN-V416U or

To AC outlet

choose the most appropriate source of power. Do not use

BN-V428U

 

provided power supply units with other equipment.

 

 

 

 

 

AC Power

 

Adapter/

 

Charger

POWER

DC OUT connector

indicator

CHARGE indicator

Battery pack

Fully charging time

BN-V408U

approx. 1 hr. 30 min.

BN-V416U (optional)

approx. 2 hrs.

BN-V428U (optional)

approx. 3 hrs. 20 min.

CHARGING THE BATTERY PACK

1 Make sure you unplug the camcorder’s DC cord from the AC Power Adapter/Charger. Plug the AC Adapter/ Charger’s power cord into an AC outlet. The POWER indicator lights.

2 Attach the battery pack with the mark aligned with the corresponding marks on the AC Power Adapter/Charger. The CHARGE indicator begins blinking to indicate charging has started.

3 When the CHARGE indicator stops blinking but stays lit, charging is finished. Slide the battery and lift off. Remember to unplug the AC Adapter/Charger’s power cord from the AC outlet.

NOTES:

If the protective cap is attached to the battery pack, remove it first.

Perform charging where the temperature is between 10°C and 35°C (50°F and 95°F). 20°C to 25°C (68°F to 77°F) is the ideal temperature range for charging. If the environment is too cold, charging may be incom- plete.

Charging times noted above are for a fully discharged battery pack.

Charging time varies according to the ambient temperature and the status of the battery pack.

To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.

If you connect the camcorder’s DC cord to the adapter during battery charging, power is supplied to the camcorder and charging stops.

Since the AC Power Adapter/Charger processes electricity internally, it becomes warm during use. Be sure to use it only in well-ventilated areas.

When charging the battery pack for the first time or after a long storage period, the CHARGE indicator may not light. In this case, remove the battery pack from the AC Power Adapter/Charger, then try charging again.

If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced. Please purchase a new one.

Lithium-ion is vulnerable in colder temperatures.

About Batteries

DANGER! Do not attempt to take the batteries apart, or expose them to flame or excessive heat, as it may cause a fire or explosion.

WARNING! Do not allow the battery or its terminals to come in contact with metals, as this can result in a short circuit and possibly start a fire.

The Benefits Of Lithium-Ion Batteries

Lithium-ion battery packs are small but have a large power capacity. However, when one is exposed to cold temperatures (below 10°C/50°F), its usage time becomes shorter and it may cease to function. If this happens, place the battery pack in your pocket or other warm, protected place for a short time, then re-attach it to the camcorder. As long as the battery pack itself is not cold, it should not affect performance.

(If you’re using a heating pad, make sure the battery pack does not come in direct contact with it.)

Image 8
Contents GR-DV2000 Dear Customer It is recommended that youPower Sources Power Cord ProtectionPower Lines Grounding or PolarizationAccessories CleaningDamage Requiring Service Replacement Parts Safety Precautions Make sure you only use cassettes with the Mini DV markCU-V504U AAA R03 Battery x For remote control unitRM-V716U Jack Box CamcorderHow To Attach The Lens Hood ThreadingCamcorder’s lens and screw It in clockwisePower Charging the Battery PackProvided power supply units with other equipment Lithium-ion is vulnerable in colder temperaturesUsing the Battery Pack Using AC PowerTo Detach The Battery Pack Approximate recording timeGrip Adjustment Viewfinder Adjustment10 EN Shoulder Strap AttachmentEN11 Date/Time SettingsBuilt-in Clock’s Rechargeable Lithium Battery 12 EN Loading/Unloading a CassetteTo Unload a Memory Card Loading a Memory CardEN13 Operation Mode Power Switch Position ManualShooting Mode Switch Position 14 ENRecording Mode Setting EN15Go to step Picture Mode Setting16 EN Approximate number of storable images EN17Storage Capacity To Stop Recording To Adjust The Brightness Of The Display18 EN EN19 Journalistic ShootingInterface Shooting To turn the tally lamp or beep sounds off,  pgSnapshot For Video Recording Snapshot Mode Selection20 EN Basic Shooting Snapshot Slide the Power Zoom Lever towards T 22 ENZoom Zoom OutProper recording When a blank portion is recorded on a tapeEN23 Progressive Mode Recording To End Progressive Mode RecordingRegular shooting of moving images Description of Progressive Scan CCDEN25 EN Recording Advanced Features For Video And D.S.C. Dual ShootingFeature Auto Focus Feature Manual FocusEN27 To obtain correct focusUsing Menus For Detailed Adjustment If you have selected FADER/WIPE Program AE or W. BalanceSee pg SYSTEM, Display or DSCEN29 Menu Screen ExplanationsRefer to Self-Timer  pg Video  pg and Camera Mode is set to Video or PSVideo  pg and Camera Mode is set to PS-VIDEO Refer to 5-Second Recording  pgEN31 Self-Timer Instead of pressing the Recording Start/Stop Button Second RecordingEN33 Picture Wipe or Dissolve Selection Fade/Wipe EffectsFADE/WIPE Selection Menu Effect EN35Fader And Wipe Menu Program AE With Special Effects To Deactivate The Selected ModePress PROG.AE again so that the effect indicator Disappears EN37 Sports Variable Shutter Speed 1/250 1/4000*4STROBE*2 Slow Slow Shutter*1Exposure Control Iris LockWhite Balance Adjustment Manual White Balance OperationEN39 To Return To Automatic White Balance40 EN To Control The Speaker VolumeAvailable only with the remote control provided  pg Playback Advanced Features For Video Display 42 ENPlayback Sound To cancel Blank Search midway Blank SearchEN43 Press Blank Search44 EN Normal PlaybackAuto Playback Out the viewfinder fullyEN45 Index ScreenIndex Playback 46 EN Protecting ImagesTo Protect AN Image To Remove ProtectionDeleting Images EN47To Delete the Displayed Image To Delete ALL Images48 EN Superimposing a Print FrameTo Make The Print Frame Disappear Press Print FrameYou can initialize a memory card anytime Initializing a Memory CardEN49 50 EN Print Frame DeletionPerform steps 1 through 5 on pag EN51To Delete ALL Print Frames Setting Print Information Dpof Setting To Reset The SettingTo Reset The No. Of Prints EN53To Print by Selecting Still Images NO. of Prints54 EN To TV or VCREN55 Turn the camcorder’s Power Switch to While USB Mode Accessing File appears on56 EN Connection To a Personal ComputerMake sure all units are turned off Connection To a Video Unit Equipped With a DV ConnectorEN57 To use this camcorder as a player 58 ENDubbing To Or From a VCR EN59 60 EN Dubbing Images Recorded On a Tape To a Memory CardInstalling The Batteries EN6162 EN ButtonsFeature Slow-Motion Playback Feature Frame-By-Frame PlaybackFeature Playback Zoom EN63Feature Playback Special Effects 64 ENEN65 SET REMOTE/VCR CodeVCR Recording deck Press Shift for this oneJVC VCR equipped with a remote pause connector 66 ENMake Connections VCR other than aboveEN67 Select Scenes68 EN Automatic Editing to VCRFor More Accurate Editing EN69Diagnosing VCR/CAMCORDER Timing Recording deckAdjustment of VCR/CAMCORDER Timing 70 ENSet 12BIT Mode to Sound 2 or MIX Menu Screen  pg Audio DubbingEN71 To hear the dubbed sound during playback72 EN Insert EditingTroubleshooting Corrective Action74 EN EN75 Remove protection from 76 ENDo not try to use the Classic EN77 78 EN Press Memory Play toEN79 After Use Cleaning The Camcorder80 EN DC Input Connector DC  pg Video Input/Output ConnectorConnect the editing cable when performing Multi Connector82 EN Rty EEN83 Displays the recording mode SP or LP Displays the Uxga mode Double orThese indications also appear during Dual mode Rotates while the tape is runningEN85 Displays the sound mode pg Displays the Blank Search mode LCD Monitor/Viewfinder Indications During Video PlaybackLCD Monitor/Viewfinder Indications During D.S.C. Playback Displays the tape speedEN87 Indications FunctionSwitch is set to PossibleSnapshot is pressed Appears, the memory card is corruptedTemperature Range Specifications EN8990 EN EN91 92 EN EN93 Print Frame Deletion  pg94 EN For GeneralFor Digital Video Camera For Digital Still CameraFor Connectors EN95GR-DV2000
Related manuals
Manual 96 pages 25.39 Kb