JVC GR-DV2000 specifications EN87, Indications Function

EN87

Warning Indications

Indications	Function
	Displays the battery remaining power.
	Remaining power level: high
	Remaining power level: exhausted
	As the battery power comes close to nil, the battery indicator		blinks.
	When the battery power is exhausted, power turns off automatically.
	Appears when no tape is loaded.	( pg. 12)
CHECK TAPE’S ERASE	Appears when the erase protection tab is set to “SAVE” while the Power
PROTECTION TAB	Switch is set to “ ” or “ ”.	( pg. 12)
	Appears if dirt is detected on the heads during recording. Use an optional
HEAD CLEANING	cleaning cassette.	( pg. 90)
REQUIRED USE
CLEANING CASSETTE
	Appears if condensation occurs. When this indication is displayed, wait
CONDENSATION	more than 1 hour until condensation disappears.
OPERATION PAUSED
PLEASE WAIT
TAPE!	Appears if a tape is not loaded when the Recording Start/Stop Button is
	pressed while the Power Switch is set to “ ” or “ ” and the Shooting
	Mode Switch is set to “VIDEO”.
TAPE END	Appears when the tape ends during recording or playback.	( pg. 19)
DIFFERENT	Appears if a tape in another format is loaded.
FORMATTED TAPE
SET DATE/TIME!	●Appears when the date/time is not set.	( pg. 11)
	●Appears when the built-in clock (lithium) battery is discharged and the
	previously set date/time is erased.	( pg. 11)
A. DUB ERROR!	Appears if Audio Dubbing is attempted on a blank portion of a tape.
		( pg. 71)
A. DUB ERROR!	●Appears if Audio Dubbing is attempted on a tape recorded in the LP
<CANNOT DUB	mode.	( pg. 71)
ON A LP RECORDED	●Appears if Audio Dubbing is attempted on a tape recorded in 16-bit
TAPE>
	audio.	( pg. 71)
<CANNOT DUB
	●Appears if A. DUB (e) on the remote control is pressed when the erase
ON A 16BIT
	protection tab is set to “SAVE”.	( pg. 71)
RECORDING>
<CHECK TAPE’S ERASE
PROTECTION TAB>
INSERT ERROR!	Appears if Insert Editing is attempted on a blank portion of a tape.
		( pg. 72)

CONTINUED ON NEXT PAGE