60 EN
Power Switch
SNAPSHOT 
Button
Lock Button
COPY – OF F
ON
Play/Pause Button (4/6)
MENU Wheel
Display
SP 46
DUBBING (cont.)
Dubbing Images Recorded On A Tape To A Memory Card
Images can be dubbed from a tape to a memory card .
1 Load a memory card ( pg. 13) and cassette ( pg. 12).
2 Set the Power Switch to “ 
” while pressing down the Lock Button. Open the LCD monitor fully or pull out the viewfinder fully.
3 Press the MENU wheel. The Menu Screen appears. Rotate it to select “ 
VIDEO” and press it. The VIDEO Menu appears.
4 Rotate the MENU wheel to select “ 
COPY” and press it. The Sub Menu appears. Rotate it to select “ON” and press it. Selection is complete.
5
6 To select a video image to be dubbed, start playback by pressing 4/6. At the moment you find the image you wish to dub, press it again to engage Still Playback.
7 To start dubbing, press SNAPSHOT. The selected image is stored in the memory card.
•“
” blinks during dubbing.
NOTES:
●If SNAPSHOT is pressed in step 7 when a memory card is not loaded, the message “COPYING FAILED” is displayed.
●If an image recorded on the tape using the WIDE mode ( pg. 30) is dubbed to a memory card, the WIDE mode identifying signal is not dubbed with it.
●To use Playback Special Effects with a video image you
wish to dub, perform up to step 7 using the remote control (provided) ( pg. 64).
●Images are dubbed in VGA file size.