EN29
MANUAL MENU
DISPLAY MENU
WIND | OFF | Disengages the function which cuts down on noise created by wind. |
| ||
CUT |
|
|
|
| |
ON | Helps cut down on noise created by wind. “ ” appears. The quality of the | ||||
| |||||
|
| sound will change. This is normal. |
|
| |
|
|
|
|
| |
FLASH | Refer to “Snapshot Flash” ( pg. 30). |
|
| ||
|
|
|
| ||
FLASH | Refer to “Flash Brightness Adjustment” ( pg. 31). |
|
| ||
ADJ. |
|
|
|
| |
ON | LCD | Keeps the camcorder’s display (except the date, time and time code) from | |||
SCREEN |
| appearing on the connected TV screen. |
|
| |
|
|
| |||
| LCD/TV | Makes the camcorder’s display appear on screen when the camcorder is | |||
|
| connected to a TV. |
|
| |
| SIMPLE | Keeps the indications (except the tape running indicator, warnings, date, time, | |||
|
| time code, etc.) from appearing in the camcorder. Also keeps the camcorder’s | |||
|
| display (except the date, time and time code) from appearing on the |
| ||
|
| connected TV screen. |
|
| |
|
|
|
| ||
DATE/ | AUTO | Displays the date/time for approx. 5 seconds in the following cases: |
| ||
TIME |
| •When the POWER Switch is set from “OFF” to “ | ” or “ | ”. |
•When playback starts. The camcorder displays the date/time when scenes are recorded.
•When the date is changed during playback.
| OFF | The date/time does not appear. |
| ON | The date/time is always displayed. |
|
|
|
TIME | OFF | Time code is not displayed. |
CODE | ON | Time code is displayed on the camcorder and on the connected TV. Frame |
| ||
|
| numbers are not displayed during recording. |
|
| |
CLOCK | Allows you to set the current date and time ( pg. 9). | |
ADJ. |
|
|
:
NOTES:
●The “MANUAL MENU” settings are effective only when the Operation Switch is set to “ ”.
●“DISPLAY MENU” functions which are set when the POWER Switch is set to “ ” are also applied
when the POWER Switch is set to “ ” ( pg. 41). “CLOCK ADJ.” only appears when the POWER
Switch is set to “ ”.
●The “DISPLAY MENU” settings are effective even when the Operation Switch is set to “ ”.
●The “ON SCREEN” setting can also be changed by pressing the DISPLAY Button on the remote control (provided) ( pg. 57, 60, 71).