JVC GR-DVX9 specifications EN75, Adjustment of VCR/CAMCORDER Timing, Recording deck

EN75

ADJUSTMENT OF VCR/CAMCORDER

TIMING

			Point the remote control at the camcorder’s remote
			4 sensor and press R.A.EDIT ON/OFF to make the
			Random Assemble Editing menu disappear, then
			press the MENU wheel. The Menu Screen appears.
			Rotate the MENU wheel to select “ ” and press it.
			5 “VIDEO MENU” appears. Then, rotate it to
			“SYNCHRO” and press it. The value for “SYNCHRO”
			is highlighted.
			Based on the diagnostics performed ( pg. 74), you
			6 can now advance the VCR’s record timing by rotating
MENU Dial			the MENU wheel towards “+”. You can also delay the
			VCR’s record timing by rotating the MENU wheel
			towards “–”. The adjustment range is from –1.3 to
Display			+1.3 seconds, in 0.1-second increments.
V I DEO MENU			Press the MENU wheel to finish the setting.
1RE TURN			Rotate the MENU wheel to select “1RETURN” and
SOUND MODE
1 2B I T MODE	+ 1 . 0		7 press it twice.
SYNCHRO
REC MODE			Now perform Random Assemble Editing beginning
BLANK SRCH			with step 4 on page 72.
COPY		GR-DVX10 only
AV / S – V I DEO			NOTES:

●Before performing actual Random Assemble Editing, do a few Random Assemble Editing trial runs to check whether the value you have input is appropriate or not,

and make adjustments accordingly.

● Depending on the recorder, there may be situations where the timing difference cannot be fully corrected.

VCR

(Recording deck)

TV