JVC GR-DVX9 specifications EN81, Is ending Dissolve before beginning

EN81

SYMPTOM

17.Programme AE with special effects and Fade/Wipe Effects do not work.

18.The Black & White Fader does not work.

19.The Dissolve function does not work.

20.The Picture Wipe and Dissolve functions do not work.

21.The picture wipe function does not work.

22.Scene transition does not go as expected.

23.The Video Echo mode does not work.

POSSIBLE CAUSES	CORRECTIVE ACTION
17. • The Operation Switch is set to	17. • Set the Operation Switch to
“ ”.	“ ” ( pg. 34, 36).
18. • The Sepia or Monotone mode	18. • Turn off Sepia and Monotone
is activated.	( pg. 34, 36).
19. • The Sepia, Monotone or Slow	19. • Turn off Sepia, Monotone or
Shutter mode of Programme	Slow Shutter before adding
AE with special effects is	Dissolve to a scene transition
activated.	( pg. 34, 36).
• “WIDE MODE” is set to	• Set “WIDE MODE” to
“SQUEEZE” or “PS-WIDE” in	“CINEMA” or “OFF” mode
the Menu Screen.	( pg. 28).
• The previously selected mode	• Make sure you have selected
of Programme AE with special	the mode of Programme AE
effects was changed after the	with special effects you want
last selected scene for editing	before starting editing
was registered.	( pg. 34, 36).
20. • The last selected editing scene	20. • Select Picture Wipe or
is ending.	Dissolve before beginning
• At the end of the last selected	recording. The effects are then
scene for editing, the POWER	automatically activated
Switch was set to “OFF”.	( pg. 34).
• The power is off.	• Do not turn off the
	camcorder’s power after
	setting Edit-In and Edit-Out
	points, as they will all be
	erased ( pg. 34).
	• The camcorder automatically
	shuts off after 5 minutes have
	elapsed in the Record-Standby
	mode. Make sure you
	continue operations within 5
	minutes after engaging Record-
	Standby mode ( pg. 34).
21. • The Slow Shutter mode is	21. • Disengage the Slow Shutter
activated.	mode or set “WIDE MODE”
• “WIDE MODE” is not set to	to “OFF” before preparing to
“OFF”.	use the Picture Wipe
	( pg. 28, 34, 36).
22. • When using “Picture Wipe/	22.
Dissolve” ( pg. 34), there is
a delay of a fraction of a
second between the previous
record stop-point and the	————
Dissolve start-point. This is
normal, but this slight delay
becomes especially
noticeable when shooting
fast-moving subject or during
rapid panning.
23. • The Picture Wipe or	23. • Set “WIDE MODE” to
Dissolve functions are in use.	“CINEMA” or “OFF” mode
• “WIDE MODE” is set to	( pg. 28).
“SQUEEZE” or “PS-WIDE” in	• Do not try to use the Video
the Menu Screen.	Echo mode during a Fade-In
• A Fade-In or Fade-Out is in	or Fade-Out ( pg. 34, 36).
progress.

CONTINUED ON NEXT PAGE