Red to
AUDIO R
To JLIP
(EDIT) White to
AUDIO L
Core filter
Editing cable (provided)
To S
Yellow to
VIDEO*
Core filter
Audio/Video cable [RCA plug to RCA plug] (optional)
To AUDIO, VIDEO* and
EN71
MAKE CONNECTIONS
Also refer to pg. 56 and 57.
1 A JVC VCR equipped with a remote pause connector . . .
... connect the editing cable to the Remote PAUSE connector.
A JVC VCR not equipped with a remote pause connector but equipped with an R.A. EDIT connector . . .
... connect the editing cable to the R.A.EDIT connector.
A VCR other than above . . .
... connect the editing cable to the remote control’s PAUSE IN connector.
2 Insert a recorded tape into the camcorder and set the
POWER Switch to “” while pressing down the Lock Button located on the switch.
3 Turn the VCR power on, insert a recordable tape and engage the AUX mode (refer to the VCR’s instructions).
NOTES:
●Before Random Assemble Editing, make sure the indications do not appear on the TV monitor. If they do, they will be recorded onto the new tape.
To choose whether or not the following displays appear on the connected TV . . .
•Date/Time
If your VCR has the SCART connector, use the provided cable adapter.
To Remote PAUSE or R.A.EDIT
To PAUSE IN
DISPLAY
“Y/C”/“CVBS” video out select switch
VCR
TV |
.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the
Menu Screen ( pg. 41).
•Time Code
.... set “TIME CODE” to “ON” or “OFF” in the Menu
Screen ( pg. 41).
•Playback Sound Mode, Tape Speed And Tape Running Displays
.... set “ON SCREEN” to “LCD” or “SIMPLE” in the Menu Screen ( pg. 41). Or, press DISPLAY on the remote control.
●For
●When connecting the cables, make sure to connect the ends with a core filter to the camcorder. The core filter reduces interference.
●Set the video out select switch of the cable adapter as required:
*Connect when an
ATTENTION FOR EDITING CABLE
•Be careful not to mistake it for the JLIP cable ( pg. 4).
•Make sure you connect the end with the core filter to the camcorder.
Y/C : When connecting to a TV or VCR which accepts Y/C signals and uses an
CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.
●When editing on a VCR equipped with a DV input connector, an optional DV cable can be connected instead of an
●You can use the AV OUT connector on the camcorder for connection.
CONTINUED ON NEXT PAGE