JVC GR-DVX9 specifications EN57, Make sure all units are turned off

Page 57
Connect the VCR output to the TV input, referring to your VCR’s instruction manual.

EN57

C. Connection to a TV or VCR equipped with an S-VIDEO IN and/or A/V input (RCA type) connectors

*The Audio cable is not required for watching still images with the POWER Switch set to “

MEMORY PLAY

”.

To TV or VCR

Yellow to VIDEO IN p(

When an S-Video

)[Yellow to VIDEO

cable is not used.

 

 

 

 

 

 

TV

VCR

White to

AUDIO L IN*

Red to

AUDIO R IN*

Audio/Video cable [RCA plug to RCA plug] (optional)

White to AUDIO L*

Red to AUDIO R*

To S-VIDEO IN

S-Video cable

To S

 

(optional)

 

1 Make sure all units are turned off.

2 Connect the camcorder to a TV or VCR as shown in the illustration ( pg. 56, 57).

If using a VCR . . . go to step 3.

If not . . . go to step 4.

3

4 Turn on the camcorder, the VCR and the TV.

5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.

To choose whether or not the following displays appear on the connected TV . . .

Date/Time

.... set “DATE/TIME” to “AUTO”, “ON” or “OFF”

in the Menu Screen ( pg. 41).

Time Code

.... set “TIME CODE” to “ON” or “OFF” in the

Menu Screen ( pg. 41).

Playback Sound Mode, Tape Speed And Tape Running Displays for video playback

Or

Directory/File Names and Image Number/Total Number of Images for D.S.C. Playback

.... set “ON SCREEN” to “LCD” or “SIMPLE” in the Menu Screen ( pg. 41).

Or, press DISPLAY on the remote control.

NOTES:

It is recommended to use the AC Power Adapter/

Charger as the power supply instead of the battery pack (  pg. 7).

When connecting the cables, make sure to connect the ends with a core filter to the camcorder. The core filter reduces interference.

To monitor the picture and sound from the camcorder without inserting a tape or MultiMediaCard, set the camcorder’s POWER

Switch to “ ”, then set your TV to the appropriate input mode.

Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.

While the Audio/Video cable is connected to the AV OUT connector, sound cannot be heard from the speaker.

Set the video out select switch of the cable adapter as required:

Y/C : When connecting to a TV or VCR which accepts Y/C signals and uses an S-Video cable.

CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.

Image 57
Contents GR-DVX10 GR-DVX9 It is recommended that you Dear CustomerSome DO’S and DON’TS on the Safe USE of Equipment Cleaning Cloth Remote Control Unit RM-V716U Core Filter xRCA plug cable Cable Adapter DC CordRelease the stoppers on both ends of the Core Filter How To Attach Core FiltersStopper Wind onceCharging the Battery Pack PowerLithium-ion is vulnerable in colder temperatures Benefits Of Lithium-Ion BatteriesUsing AC Power Using the Battery PackTo Detach The Battery Pack While sliding down BATT. RELEASE, detach itViewfinder Adjustment Grip AdjustmentDioptre Adjustment Control Tripod MountingBuilt-in Clock’s Rechargeable Lithium Battery Date/Time SettingsSet the Operation Switch to and set the Power Power Switch Power Lamp Lock Button Operation Menu Wheel10EN OPEN/EJECT Switch Erase protection tabLoading/Unloading a Cassette Cassette holder coverEN11 Recording Mode SettingDisplay Menu Screen Sub Menu12EN Loading a MultiMediaCardTo Unload a MultiMediaCard Set the Power Switch to While pressing Picture Quality/Size Mode SettingMode Dial to EN13Power Switch Position Operation ModeOperation Switch Position Manual 14ENProgressive Mode Mode Dial PositionEN15 Function16EN To Adjust The Brightness Of The DisplayPress START/STOP To Stop RecordingJournalistic Shooting EN17SELF-RECORDING Self-Recording18EN Snapshot Mode SelectionSnapshot For Video Recording Snapshot RecordingEN19 Basic Shooting SnapshotTo Delete Unwanted Still Images To Remove The Shutter Sound20EN Slide the Power Zoom Lever towards TZoom Zoom OutWhen a blank portion is recorded on a tape EN21Proper recording To End Progressive Mode Recording Progressive Mode RecordingEN23 Description of Progressive Scan CCDRegular shooting of moving images Frame Scan a Scan BFocus Button Dual ShootingStill image Fully-pressed PositionFeature Manual Focus Feature Auto FocusEN25 To obtain correct focusSee pg Power Switch Lock Button Operation Switch Menu WheelGo to step Menu ScreenEN27 Menu Screen ExplanationsDemonstration will resume Refer to Self-Timer  pgAfter viewing demo, set to OFF Automatic demonstration will not take placeEN29 If Auto Is Selected Snapshot FlashPower Switch Lock Button Operation Switch Flash Brightness AdjustmentEN31 Menu Wheel DisplaySelf-Timer Mode Dial to Video Second RecordingEN33 FADE/WIPE Selection Fade/Wipe EffectsPicture Wipe or Dissolve Selection To Deactivate The Selected EffectEN35 Fader And Wipe MenuMenu Effect Programme AE With Special Effects To Deactivate The Selected ModeTo cancel recording the sound effect midway Sound Effect Mode SelectionDigital Sound Effects EN37Iris Lock Exposure ControlManual White Balance Operation White Balance AdjustmentEN39 To Return To Automatic White BalanceAvailable only with the remote control provided  pg To Control The Speaker VolumePower Zoom Lever VOL Menu Wheel Speaker Lock Button Rewind ButtonEN41 42EN Playback SoundDisplay Blank Search To cancel Blank Search midwayEN43 Video Menu appears44EN To cancel E-Mail Clip RecordingMail Clip Recording To view video clips stored in a MultiMediaCardAuto Playback Normal PlaybackImages shot with the camcorder are automatically Numbered, then stored in numerical orderIndex Screen Protect icon Power Switch Lock Button Menu WheelType of file DirectoryEN47 Index PlaybackIf you press Index twice If you press Index three timesProtecting Files 48ENTo Protect a File To Remove ProtectionDeleting Files Power Switch Lock ButtonEN49 To Select a File by Browsing Files Stored in Memory50EN Power Switch Menu Wheel DisplayInitialising a MultiMediaCard You can initialise a MultiMediaCard anytimeEN51 Superimposing a Print FrameTo Make The Print Frame Disappear Press Print Frame52EN Set the Power Switch toPrint Frame Deletion Lock Button Delete Index Screen Deletion ConfirmationTo Delete ALL Print Frames To Reset The Setting 54ENTo Print ALL Still Images ONE Print for Each EN55 To Reset The No. Of PrintsTo Print by Selecting Still Images and NO. of Prints Perform steps 1 through 4 on pgDocking Station with the stud hole 56ENCamcorder Tighten the screwIf using a VCR . . . go to step If not . . . go to step EN57Make sure all units are turned off Connection To a Personal Computer 58ENEN59 Connection To a Video Unit Equipped With a DV ConnectorWith a DV input Core filter Digital PrinterDubbing To a VCR 60ENTo use this camcorder as a player For GR-DVX10 owners onlyEN61 Dubbing From a VCR62EN To DV OUT Core filter DV cable optionalPlay Stop To DV IN/OUT Core filter DV cable optional To DV OUT EN63Indicator disappears when dubbing is complete 64ENDubbing Images Stored In a MultiMediaCard To a Tape Menu Wheel Power Switch Lock Button Dubbing Images Recorded On a Tape To a MultiMediaCardEN65 66EN Installing The BatteriesTab Remote sensorFunctions Buttons EN67Feature Frame-By-Frame Playback Feature Slow-Motion PlaybackFeature Playback Zoom 68ENFeature Playback Special Effects EN69Effect Select Menu SET REMOTE/VCR Code 70ENVCR Recording deck You are now ready to try Random Assemble EditingMake Connections EN71Select Scenes 72ENProgramme Editing MenuAutomatic Editing to VCR EN73For More Accurate Editing 74ENDiagnosing VCR/CAMCORDER Timing Tvvcr Recording deckAdjustment of VCR/CAMCORDER Timing EN75Recording deck 76EN Set 12BIT Mode to Sound 2 or MIX Menu Screen  pgAudio Dubbing To hear the dubbed sound during playbackEN77 Audio Dubbing Using Digital Sound EffectsPush Here OPEN/EJECT Switch Hatch Lens blower Cleaning The Camcorder78EN After UseCorrective Action Troubleshooting80EN TroubleshootingIs ending Dissolve before beginning EN81White Balance cannot be activated 82EN pg EN8384EN Printer Connector If 5 minutes elapse in the Record-Standby modeMulti Connector EN8586EN EN87 Appears while the tape is running 88ENDisplays the Time Code Order of qualityEN89 Displays the sound mode LCD Monitor/Viewfinder Indications During Video PlaybackLCD Monitor/Viewfinder Indications During D.S.C. Playback EN91 While the Power Switch is set to 92ENDeleted EN93 To prevent damage and prolong service lifePack, be sure to read the Terminals following cautions To avoid hazards94EN To protect the unit, do not EN95About moisture condensation Serious malfunctioning96EN Print Frame Deletion  pg EN9798EN EN99 EG/EK