EN 15
Date/Time Settings
The date/time is recorded onto the tape at all times, but its display can be turned on or off during playback. ( pg. 38, 48)
MENU Button
SET/SELECT Button | +, – Button |
|
POWER Lamp
Power Switch
Lock Button
1Set the Power Switch to “M” while pressing down the Lock Button located on the switch.
2Open the LCD monitor fully, or pull out the viewfinder fully.
3Press MENU. The Menu Screen appears.
W IPE / FADER OFF
PROGRAM AE
W. BALANCE
CAMERA
MANUAL
SYSTEM
D I SPLAY
DSC
END
4Press + or – to select “n DISPLAY”, and press SET/SELECT. The DISPLAY Menu appears.
|
| ON SCREEN |
| – | LCD / TV | ||
|
|
| |||||
|
|
| DATE / T I ME |
| – | AUTO |
|
|
|
| T I ME CODE |
| – | OFF |
|
|
|
| CLOCK |
|
| 2 0 . 12 | . 01 |
|
|
| ADJ. |
|
| 17 | : 3 0 |
|
|
|
|
|
|
|
|
RETURN
5Press + or – to select “CLOCK ADJ.”, and press SET/SELECT. The parameter for “Day” is highlighted.
6Press + or – to input the day, and press SET/ SELECT. Repeat to input the month, year, hour and minute.
|
| CLOCK |
|
|
|
| |
|
|
|
|
|
| ||
|
|
|
|
|
| ||
|
|
| 2 0 | . 12 | . 01 | ||
|
| ADJ. |
|
| 17 | : 3 0 | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7Press + or – to select “BRETURN”, and press SET/ SELECT twice. The Menu Screen closes.
Built-in Clock’s Rechargeable Lithium Battery
To store the date/time in memory, the clock’s rechargeable lithium battery is integrated in the camcorder. While the camcorder is connected to an AC outlet using the AC Power Adapter/Charger, or while the battery pack attached to the camcorder continues to supply power, the clock’s rechargeable lithium battery is always charged. However, if the camcorder is not used for approx. 3 months, the clock’s lithium battery will become discharged and the date/time stored in memory will be lost. When this occurs, first connect the camcorder to an AC outlet using the AC Power Adapter/Charger for over 24 hours to charge the clock’s rechargeable lithium battery. Then perform the date/time setting before using the camcorder.
Note that the camcorder can be used without setting the date/time.
NOTE:
Even if you select “CLOCK ADJ.”, if the parameter is not highlighted, the camcorder’s internal clock continues to operate. Once you move the highlight bar to the first date/time parameter (day), the clock stops. When you finish setting the minute and press SET/SELECT, the date and time begin operation from the date and time you have just set.