74 EN | USING THE REMOTE CONTROL UNIT (cont.) |
Make Connections
Also refer to page 24 and 25.
Connector | To S/AV |
Cover**** | connector |
S/AV/Editing cable (provided)
To AUDIO,
VIDEO and S-
IN* connectors
Editing Extension cable (provided)***
“Y/C”/“CVBS” |
|
| Cable Adapter** |
| |||
Video Out |
| ||
Select Switch |
| ||
ABTo Remote
PAUSE or
R.A.EDIT
VCR
CTo PAUSE
IN
TV
DISPLAY
*Connect when your TV/VCR has an
**If your VCR has a SCART connector, use the provided cable adapter.
***If necessry, use this cable for connections.
****When connecting the cable, open the cover.
1A A JVC VCR equipped with a Remote PAUSE connector…
…Connect the editing cable to the Remote
PAUSE connector.
B A JVC VCR not equipped with a Remote
PAUSE connector but equipped with an R.A.EDIT connector…
…Connect the editing cable to the R.A.EDIT connector.
C A VCR other than above…
…Connect the editing cable to the remote control’s PAUSE IN connector.
2Insert a recorded tape into the camcorder.
3Set the VIDEO/MEMORY Switch to “VIDEO”.
4Set the Power Switch to “P” while pressing down the Lock Button located on the switch.
5Turn the VCR power on, insert a recordable tape and engage the AUX mode.
● Refer to the VCR’s instructions.
NOTES:
●Before Random Assemble Editing, make sure the indications do not appear on the TV monitor. If they do, they will be recorded onto the new tape.
To choose whether or not the following displays appear on the connected TV…
•Date/Time
Set “DISPLAY” to “AUTO”, “ON” or “OFF”.
( pg. 38, 48) Or, press DISPLAY on the remote control to turn on/off the date indication.
•Time Code
Set “TIME CODE” to “ON” or “OFF”. ( pg. 38, 48)
•Playback Sound Mode, Tape Speed And Tape Running Displays
Set “ON SCREEN” to “LCD” or “LCD/TV”. ( pg. 38, 48)
●Set the video out select switch of the cable adapter as required:
Y/C: When connecting to a TV or VCR which accepts Y/C signals and uses an
CVBS: When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.
●When editing on a VCR equipped with a DV input connector, an optional DV cable can be connected instead of the S/AV/Editing cable. However, it is necessary to connect the editing cable of the S/AV/Editing cable to the VCR. (For details, see step 1.)