EN 61
To make video clips from recorded video footage
Stop Button (8)
VIDEO/MEMORY Switch
Play/Pause
Button (4/9)
Power Switch
SNAPSHOT Button
Lock Button
1Load a cassette. ( pg. 16)
2Load a memory card. ( pg. 17)
3Set the VIDEO/MEMORY Switch to “VIDEO”.
4Set the Power Switch to “P” while pressing down the Lock Button located on the switch.
5Set
6Press 4/9 to start video playback.
7Press
●
“SNAPSHOT” TO RECORD CLIP TO CARD” appears.
●To cancel
8At the point you want to start dubbing, press SNAPSHOT to start
9Press SNAPSHOT to stop
●“COMPLETED” is displayed, then the camcorder
10Press
To view video clips stored in a memory card…
Refer to “Playback Of Video Clips” ( pg. 29).
To delete unwanted video clips stored in a memory card…
Refer to “Deleting Files” ( pg. 33).
NOTES:
●Playback operation cannot be performed during
●If the end of the tape is reached during
●If the end of the tape is reached in step 7, the
●The video clip files stored with this camcorder are compatible with MPEG4. Some MPEG4 files stored with other devices cannot be played back with this camcorder.
●Video noise may appear while viewing video clips in the LCD monitor or viewfinder, however, this noise is not present in the actual video clips stored in the memory card.
●You can also view video clips on your PC by using Windows® Media Player version 6.4 or later. Refer to the instructions of PC and software.