EN 7
How To Attach The Strap
1)Thread one end of the strap through the eyelet, then pass the other end through the loop.
2)Attach the screw to the tripod mounting socket. To tighten the screw firmly, use a coin, etc.
3)Adjust the length with the adjuster.
NOTES:
●You can use the strap as a shoulder strap by adjusting the length with the adjuster.
●Because the screw may cause damage to the camcorder, make sure to attach the screw to the tripod mounting socket when carrying the camcorder.
●Use the strap only with this camcorder.
●Do not grip the camcorder too firmly when the screw is attached. Doing so may cause damage to the tripod mounting socket.