RECORDING MENUS | EN 39 |
3)Press SET/SELECT. Selection is complete.
●Repeat the procedure if you wish to set other function menus.
|
| REC MODE |
| – | SP | ||
|
|
| |||||
|
| SOUND MODE |
| – | 1 | 2B I T | |
|
| ZOOM |
| – | 4 | 0x | |
|
| SNAP | MODE |
| – | FULL | |
|
| GA I N | UP |
| – | AGC | |
|
|
|
|
|
|
|
|
RE T URN
4)Press SET/SELECT. The Menu Screen returns.
●Repeat the procedure if you wish to set other function menus.
W IPE / FADER OFF
PROGRAM AE
W. BALANCE
CAMERA
MANUAL
SYSTEM
D I SPLAY
DSC
END
5)Press SET/SELECT again. The Menu Screen closes.
NOTES:
●The “m CAMERA” settings are effective when the Power Switch is set to both “A” and “M”. However, the menu settings can be changed only when the Power Switch is set to “M”.
●The “q MANUAL” settings are effective only when the Power Switch is set to “M”.
●The “s SYSTEM” and “n DISPLAY” functions which are set when the Power Switch is set to “M” are also applied when the Power Switch is set to “P”. The “CLOCK ADJ.” menu only appears when the Power Switch is set to “M”.
●The “n DISPLAY” settings are effective even when the Power Switch is set to “A”. However, the menu settings can be changed only when the Power Switch is set to “M”.
●The date indication can also be turned on/off by pressing the DISPLAY Button on the remote control (provided). ( pg. 25, 62, 74)
Wipe Or Fader Effects
These effects let you make
IMPORTANT:
Some Wipe/Fader Effects cannot be used with certain modes of Program AE with special effects. ( pg. 41) If an unusable Wipe/Fader Effect is selected, its indicator blinks in blue or goes out.
VIDEO/MEMORY Switch
Recording Start/
Stop Button
Power Switch
Lock Button
MENU Button
SET/SELECT Button |
| +, – Button | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|