20 EN | VIDEO RECORDING (cont.) |
Zooming
Produces the zoom in/out effect, or an instantaneous change in image magnification.
Zoom In
Turn the Power Zoom (SHUTTLE SEARCH) Ring towards “T”.
Zoom Out
Turn the Power Zoom (SHUTTLE SEARCH) Ring towards “W”.
●The further you turn the Power Zoom Ring, the quicker the zoom action.
Zoom in (T: Telephoto)
1 xW | T |
|
|
|
| 1 0 xW | T |
|
|
|
| 20xW | T |
|
|
|
| 40xW | T |
Zoom out (W: Wide angle)
1 0 x W
T
Digital zoom zone
10X (optical) zoom zone
Approximate zoom ratio
Power Zoom
Ring
NOTES:
●Focusing may become unstable during Zooming. In this case, set the zoom while in Record- Standby, lock the focus by using the manual focus ( pg. 54), then zoom in or out in Record mode.
●Zooming is possible to a maximum of 200X, or it can be switched to 10X magnification using the optical zoom. ( pg. 43)
●Zoom magnification of over 10X is done through Digital image processing, and is therefore called Digital Zoom.
●During Digital zoom, the quality of image may suffer.
●Digital zoom cannot be used when the VIDEO/ MEMORY Switch is set to “MEMORY”.
●Macro shooting (as close as approx. 5 cm to the subject) is possible when the Power Zoom Ring is set all the way to “W”. Also see “TELE MACRO” in MANUAL Menu on page 46.
●For other notes, pg. 81.
Journalistic Shooting
In some situations, different shooting angles may provide more dramatic results. Hold the camcorder in the desired position and tilt the LCD monitor in the most convenient direction. It can rotate 270º (90º downward, 180º upward).
Interface Shooting
The person you shoot can view himself/herself in the LCD monitor, and you can even shoot yourself while viewing your own image in the LCD monitor.
1) Open the LCD monitor and tilt it upward to 180º so that it faces forward.
●When the LCD
monitor is tilted upward to an angle of over approx. 105º, the monitor image is inverted vertically. If the viewfinder is pulled out at that time, it also switches on.
2)Point the lens toward the subject (yourself when
●During Interface Shooting, the monitor image and indications do not appear inverted as they would when viewing a mirror.