58 EN | FEATURES FOR RECORDING (cont.) |
NAVIGATION Function
The Navigation Function helps you check tape contents by making thumbnail images on a memory card.
VIDEO/MEMORY Switch
Power Switch
Lock Button
SNAPSHOT Button
NAVI Button
MENU Button
To make thumbnail images during tape recording
1Load a cassette. ( pg. 16)
2Load a memory card. ( pg. 17)
3Set the VIDEO/MEMORY switch to “VIDEO”.
4Set the Power Switch to “A” or “M” while pressing down the Lock Button located on the switch.
5Set “NAVIGATION” to the desired navigation storing time. ( pg. 38, 47)
●The “
” appears blinking on the screen. Wait until it stops blinking. If it does not stop blinking after a while, check if a memory card is loaded.
6 Press the Recording | LP100min |
Start/Stop Button to | PAUSE |
start tape recording. |
|
The image of the point |
|
where recording is |
|
started is captured. |
|
●If the Recording
Start/Stop button is | Displayed while the | |
pressed before | captured image is being | |
“ | ” stops | stored in the memory |
blinking, the image | card. | |
of the point where the loaded memory card is recognised is captured.
●If the recording time is over the navigation time
set in step 5, “
” appears briefly and the captured image is stored in the memory card as a thumbnail image.
7Press the Recording Start/Stop Button to stop tape recording.
NOTES:
●The remaining number of storable thumbnail images also appears on the screen when it reaches
10 or less. If “REC SELECT”is set to “
/
” in DSC Menu, the number shows how many 640 x 480 pixel images can be stored.
●If “5S” is set to “5S” or “Anim.” in MANUAL menu, the NAVIGATION function will not work properly.
To find scenes on tape using thumbnail images (NAVIGATION Search)
1 Load a cassette. ( pg. 16)
2 Load a memory card. ( pg. 17)
3 Set the VIDEO/MEMORY switch to “VIDEO”.
4
5 Press NAVI during video playback or stop mode. ● The loaded cassette’s
NAVIGATION | DATE : | 2 4 . 2 5 ’ 0 2 | 3 : 3 : 2 9 | |
thumbnail image | TC : | 1 3 : 2 3 : 1 5 |
| |
screen appears. | 1 | 2 | 3 | |
|
|
| ||
● Turn the SHUTTLE | 4 | 5 | 006 | |
SEARCH Ring to the | ||||
|
|
| ||
left (3) to display |
|
|
| |
the previous page. |
|
|
| |
Turn the SHUTTLE SEARCH Ring to the right | ||||
(5) to display the next page. |
| |||
6Press + or – to select the desired image, and press
SET/SELECT.
●The “NAVIGATION SEARCH” indication appears blinking and the camcorder starts searching the tape for the relevant point of the selected thumbnail image.
To cancel NAVIGATION search midway...
Press 4/9 or 8, or turn the SHUTTLE SEARCH Ring to the left (3) or to the right (5).
CAUTION:
Do not remove the memory card or perform any other operation (such as turning off the camcorder) during deletion. Also, be sure to use the provided AC Power Adapter/Charger, as the memory card may be corrupted if the battery becomes exhausted during deletion. If the memory card becomes corrupted, initialise it.