2 FACILITIES
2.3 Factory Settings
TECTON amplifiers are delivered with the following factory settings
| 3 | 2 |
| 1 |
Front panel: |
|
|
| |
1 | On/Off Switch |
| Off | Amplifier is switched off |
2 | Volume Control - Channel B | Off |
| |
3 | Volume Control - Channel A | Off |
| |
17 | 18 | 19 | 20 | 21 | 22 |
Rear panel: |
| |
17 | Input Ground Lift | Grounded |
18 | High Pass Filter channel B | Off |
19 | Mode Selector | Stereo |
20 | Gain Selector | 26 dB |
21 | High Pass Filter channel A | Off |
22 | Clip Limiter | Off |
Make sure that the switches are set to the configuration needed for each par- ticular application. For more detailed information, see sections 3.5, 3.7 and 4.1.
P.10
USER MANUAL
TECTON POWER AMP SERIES