JVC GY-HD251 manual Battery Operation, GY-HD250U, Attaching the Battery, Removing the Battery

Page 41

e_hd250.book Page 37 Tuesday, October 24, 2006 3:11 PM

Battery Operation

The attachable battery varies depending on location. Recommended batteries

U model: Dionic 90 (Anton Bauer)

E model: Endura-7 (IDX)

CAUTION

Use only the recommended batteries.

If a heavy battery is used, the battery may fall out depend- ing on the way the HD camera recorder is used.

GY-HD250U

Use an Anton Bauer battery.

Attaching the Battery

1.Align the battery guide pins (three places) with the bat- tery adapter guide holes and insert straight. Battery will not be properly attached if guide pins are not straight.

Cassette cover	Guide	Guide pins
side panel	holes (×3)
Release lever

Battery pack (trim pack)

LCD screen side panel

2.Slide the battery towards the Cassette cover side panel until it clicks.

• The battery is attached.

Removing the Battery

Slide the battery towards you (LCD screen side panel) while holding down the release lever, and pull away from the device to remove the battery.

Release lever

Battery

GY-HD251E

Use an IDX (Endura) battery.

Attaching the Battery

1.Face the battery terminals down and align the battery V- mount with the battery adapter V-mount attachment.

V-mountV-mountattachment

2.Slide the battery down until it clicks and locks.

• The battery is attached.

Removing the Battery

Slide the battery up while holding down the lock release but- ton to remove the battery.

Release button

Battery

37

Image 41

Contents Victor Company of Japan, Limited LST0440-001B For Customer UseImportant Safeguards Remarque Safety PrecautionsPort Cable Length Safety Precautions Cont’dBusiness users Other Countries outside the European Union Information for Users on Disposal Old EquipmentEuropean Union HD251CHE Main Features Contents Playback Mode Precautions for Proper Use Precautions for Use of Head Cleaning Tape Routine and Periodical MaintenanceHead Cleaning Periodical MaintenanceVideocassette to be Used Battery Pack to be UsedCondensation occurs in the following cases Characteristic CCD Phe- nomenaCondensation Th16 × 5.5BRMU Zoom LensFront Section 1Back tally lamp Rear Section2PHONES Earphone jack 3Shoulder belt hooksLCD Door Right Side Section CWHT.BAL White balance switch BGAIN Sensitivity selector switchASTATUS Status/Menu button GHDV/DV LEDLeft Side Section DPBPR/TC PBPR/Time code switch CGENLOCK/AUX in GENLOCK/AUX in switchEIEEE1394 IEEE1394 switch GGENLOCK/AUX in GENLOCK/AUX in terminal BNCTop Section FVTR VTR indicator DMONITOR Select Audio monitor selector switchGFULL Auto Full auto shooting FAS switch LScrew holes for mounting accessoriesRecording and Image Out- put Formats Recording Composite RecordingIEEE1394 Status Screens Indications on the LCD Monitor and in the View- finderSetting Status Contents of Indications Status Screens in the Camera ModeIndications on the LCD Monitor and in the Viewfinder Cont’d ContentsUB FF EE DD IDX Endura battery Voltage/remaining capacity %Tape time appears LCD/VF3/4 menu screen. X SeeCH-2O O O O O O O O O \ \ \ CH-1O O O O O O O O O \ \ \Filter OFF ND1 ND2Indication Indication Contents HDV/DV input signal Status Screen in VTR ModeVideo Format display DoorNDF Magnified Status Indications on LCD MonitorEXT Safety Zone Indication Camera mode only Alarm Message DisplayMenu Setting Screen Center Mark OFF Switching between the LCD Screen and Viewfinder DisplaySafety Zone HZ-ZS13B Basic SystemAttaching the Microphone Provided How to Attach the View- finderAttaching the Zoom Lens Taking out the SD memory card Inserting an SD Memory CardInserting an SD Memory Card About SD Memory CardsAttaching the Tripod Base Provided only for U model AC Operation Charging the Built-in BatteryHow to charge the built-in battery Attaching the Battery Battery OperationRemoving the Battery „GY-HD250URemaining Battery Power Display Precautions for the Battery Opera- tionOperating Time with Battery Pack Precautions for the Battery PackTurning the Power on Turning the Power onTurning the Power OFF Camera modeCassette Loading Loading/Unloading the CassetteUnloading the Cassette ModeSetting the Date and Time Style Setting and Displaying the Date and TimeDisplaying the Time and Date on the Screen Setting Time code input entered the IEEE1394 connectorDisplaying Time Code Displayed Time Code/User’s BitSetting Presetting and Recording of Time CodeDrop frame/Non-drop frame mode DropZero-resetting the Time Code or User’s Bit Data Presetting time code dataPresetting user’s bit data Presetting User’s Bit Presetting the Time Code from the LCD ScreenAborting Preset Operation OperationInternal About Time Code ModePlaying Back Time Code Slave unit GY-HD250U/GY-HD251E/GY-HD110U/GY- HD111E Settings and OperationsConnections External ConnectionScreen Adjustment Viewfinder Adjustment Back Focus Adjustment White Balance Adjustment White Balance AdjustmentAdjustment procedure Error messagesWhite Shading Adjustment Setting the REC Item Setting the Video FormatSetting the Frame Rate Item ND Filter Camera SettingsScreen Size 43/169 Mode Selection Selecting the CH-2 channel input connector Audio Input Signal Selec- tionSelecting the audio signal input Adjusting Audio during RecordingLOW/MIDDLE/HIGH Monitoring Audio during RecordingAbout the Focus Assist Function Basic Recording Opera- tionIf the Record-Standby Mode Contin- ues Header REC Function Record-Standby or Stop modeFunction/Initial Setting Executing the Header REC Function How to set the Header REC menu screenSearch Playback ProcedureFast-Forward, Rewind MIX Outputting AudioPB Audio CH DV Audio MonitorConnecting the IEEE1394 Cable Connecting the Video Signal CablesDisplaying Alarms Change 1394 SwitchStatus Screen Display on the LCD Screen or Viewfinder Recording Composite Video Signals from an External DeviceAdjust SC and H Phase Using Genlock Func- tionsSynchronized Signals Dubbing with AV Devices Videocassette you want to dub HDV/DV DubbingOFF Settings Backup RecordingConnect a Remote Con- trol Unit RM-LP55/RM- LP57 Shutter Speed in 24p ModeLolux Remote Control Unit Functions ListALC+EEI Nega OFF/ON Shutter NormalMenu Screen Configura- tion Menu Screen Configuration Cont’d Setting Menu Screens TOP Menu Screen Video FORMAT1/2 Menu Screen Function/Setting bold characters indicate initial settingsSetting Description Letter Video FORMAT1/2 Menu Screen Cont’dNative Initial settings U model 7.5% E model 0.0% Terminal Setting B/P rVideo FORMAT2/2 Menu Screen Auto3200K Menu ScreenHigh Middle108% NormalStandard Skin Color DET RotationStop Skin Color RangeWhite Balance Menu Screen PresetREC Item Setting for Step Setting for Variable Switch Mode Menu Screen20dB AUDIO/MIC1/2 Menu Screen50dB 48KCH1/2 AUDIO/MIC2/2 Menu ScreenMIX Blue LCD/VF1/4 Menu Screen70-80% LCD/VF2/4 Menu Screen LCD Mirror ModeImage is displayed without inverting MirrorSEC LCD/VF3/4 Menu ScreenVoltage RGB LCD/VF4/4 Menu ScreenColor Drop TC/UB/CLOCK Menu ScreenInternal Header REC Menu Screen DisableBARS+CAM TIME/DATE Menu ScreenDATE+TIME Variation Range U model MM/DD/YY E model DD/MM/YYBlink OTHERS1/2 Menu Screen3MIN 1394 OTHERS2/2 Menu ScreenOTHERS2/2 Menu Screen Cont’d Menu ALL ResetDR-HD100 A.OFF Drum HourHD H Phase SD H Phase *1Genlock Menu Screen SC Coarse *1100 Loading a menu settings fileFile Manage Menu Screen Displaying the File Manage menu screen101 Saving settingsError displays Initializing formatting an SD mem- ory card 102103 How to Use Skin DetailSetting the skin detail function color and range 104 How to Use Skin Detail Cont’dUsing the Skin Detail Function Outputs multi-format color bars 105Outputting Color Bars Display Status Action 106107 108 Error Code Error Details GY-HD250/GY-HD251 Remedy Operation109 Blinking Pattern Remaining Battery/TapeViewfinder Screen Sound interrupted once per secondSymptoms Remedy Troubleshooting110 RGB?111 How to Display the Hour Meter112 SpecificationsExcluding the CHU/CHE model External Dimensions unit mm113

Related manuals

Manual 12 pages 39.42 Kb