JVC GY-HD251, GY-HD250 manual Outputting Audio, Mix, PB Audio CH DV, Audio Monitor

e_hd250.book Page 63 Tuesday, October 24, 2006 3:11 PM

Outputting Audio

Setting

Confirm that the GY-HD250/GY-HD251 is in the VTR mode. (VTR indicator: On)

	MONITOR			VTR indicator
	SELECT switch
				VF BRIGHT
	USER 1		USER 2	USER 3
SHUTTER	2			-	+
	ND FILTER			LCD BRIGHT
							CAM/VTR
dial	1
			MENU	AUDIO SELECT			TC
				CH-1	CH-2	DISPLAY	GENE.
				AUTO		TC	FREE
				MANU		UB	REC
		STATUS					REGEN
STATUS	WHT.BAL		CH-1	LEVEL CH-2
			AUTO	AUTO
				AUDIO
button
	ON	OFF

POWER REC

CAM/VTR button

AUDIO menu screen

„Earphone terminal output audio

Audio output is as shown in the table below depending on the MONITOR SELECT switch and AUDIO MONITOR and PB AUDIO CH [DV] settings on the AUDIO menu screen.

1.Display the AUDIO menu screen.

Select the AUDIO item on the TOP MENU screen.

2.Set the AUDIO menu screen.

• PB AUDIO CH [DV] Items

CH1/2	: To reproduce the sound (CH-1, CH-2)
		recorded during shooting.
MIX	: To reproduce the sound recorded during
		shooting (CH-1, CH-2) and the after-
		recorded sound (on CH-3 and CH-4)
		simultaneously.
CH3/4	: To reproduce the sound after-recorded
		on CH-3 and CH-4.
PB AUDIO CH [DV]		AUDIO OUT connector
		CH-1	CH-2
CH1/2		CH1	CH2
MIX		CH1+CH3	CH2+CH4
CH3/4		CH3	CH4

For HDV format, audio is output to CH1 and CH2 no matter the settings.

3.Either of the following operations returns you to the nor- mal screen.

•Press the STATUS button or

•Return to the TOP MENU screen, select the EXIT item and press the SHUTTER dial.

MEMO

•The DV format is capable of recording up to 4 channels when the 12-bit, 32 kHz sampling frequency is employed. The GY-HD250/GY-HD251 records audio on the two channels CH-1 and CH-2. (4-channel recording is possible in the case of DV input.)

When the GY-HD250/GY-HD251 is used for playback of a tape that was recorded on another unit with audio recorded on the CH-3 and CH-4 channels, the PB AUDIO CH [DV] item on the AUDIO menu screen must be set.

After-recording on the CH-3 and CH-4 channels is not possible.

•The PB AUDIO CH [DV] item is also valid for embedded audio.

•The sampling frequency for embedded audio is 48 kHz.

MONITOR	PB AUDIO CH [DV]	CH1/2	MIX	CH3/4
SELECT	AUDIO MONITOR
CH-1	-	L/R: CH1	L/R: CH1+CH3	L/R: CH3
BOTH	MIX	L/R: CH1+CH2	L/R: CH1+CH2+CH3+CH4	L/R: CH3+CH4
	STEREO	L: CH1 R:CH2	L: CH1+CH3 R: CH2+CH4	L: CH3 R: CH4
CH-2	-	L/R: CH2	L/R: CH2+CH4	L/R: CH4

* In HDV format, you can only select the settings within the bold frame.

63