JVC GY-HD250, GY-HD251 manual Backup Recording, Settings

Page 74

e_hd250.book Page 70 Tuesday, October 24, 2006 3:11 PM

USING EXTERNAL COMPONENTS

Backup Recording

Backup Recording of the GY-HD250/GY-

HD251’s Camera Image and Sound

Through the IEEE1394 Connector

The GY-HD250/GY-HD251’s camera image and sound can be recorded for backup on another component that is equipped with IEEE1394 connector.

Connections

Use the GY-HD250/GY-HD251 as the master unit.

Connect the master unit and the backup unit with a IEEE1394 cable.

„Backup unit

• Place in HDV/DV signal input mode.

* Depending on the used component, it may be neces- sary to set “REMOTE SELECT”.

•When BR-HD50 is used, set the Backup Recording function to OFF.

Also, set REM SEL HDV/DV in the REMOTE[1/2] menu of the BR-HD50 to ON or LOC+REM.

•Insert the tape and set to STOP or REC PAUSE status.

CAUTION

•Set the IEEE1394 switch on both devices to either HDV or DV.

•Start recording after making sure that both devices are properly connected.

•If the RET button is pressed during backup recording, output from the IEEE1394 terminal is stopped, the image is switched to the image recorded on this device, inter- rupting the backup recording image.

1.

IEEE1394 switch

Operation

Start and stop of recording on the backup unit takes place in accordance with the operation of the REC/VTR trigger button on the master unit.

Master unit GY-HD250/ GY-HD251

VIDEO

CH2 - AUDIO OUT - CH1

IEEE 1394

Backup unit

Signal flow

IEEE1394 cable

 

(Depending on the GY-HD250/GY-HD251 or the backup unit, the image, audio, and/or time code may deviate from what they should be at the points where the recording is started or stopped.)

MEMO

•

When the backup recording is started, the “TRIGGER

 

TO DV” or “TRIGGER TO HDV” indication is shown on

 

the LCD or in the viewfinder for approx. 3 seconds.

•

When the Series Recording function of BR-HD50 is

 

used, the GY-HD250/GY-HD251’s 1394 REC TRIG. item

Settings

„Master unit (GY-HD250/GY-HD251)

1.Set the IEEE1394 switch on left side of the GY-HD250/ GY-HD251.

DV : When backup in DV format

HDV : When backup in HDV format

2.Place in Camera mode.

3.Set the 1394 REC TRIG. item on the OTHERS[2/2] menu screen. X See page 97.

For HDV mode, set the BACK SPACE [HDV] item. X See page 97.

OTHERS[2/2] menu screen

should be set to OFF.

• If the backup device is equipped with a feature to record

time codes input from the IEEE1394 connector (TC

DUPLICATE feature), time code data the same as on the

master side can be recorded.

If the master unit tape is paused or stopped when the

master unit time code running mode is in REC RUN

mode, the time code for the slave unit stops.

• When using BR-HD50 as a backup device and switching

GY-HD250/GY-HD251 from the playback mode to the

record mode, noise will be noticed on the monitor output

screen of BR-HD50 (backup will be correctly recorded).

70

Page 73 Page 75
Image 74
Page 73 Page 75
Contents For Customer Use Victor Company of Japan, Limited LST0440-001BImportant Safeguards Safety Precautions RemarqueSafety Precautions Cont’d Port Cable LengthBusiness users Other Countries outside the European Union Information for Users on Disposal Old EquipmentEuropean Union HD251CHE Main Features Contents Playback Mode Precautions for Proper Use Head Cleaning Routine and Periodical MaintenancePrecautions for Use of Head Cleaning Tape Periodical MaintenanceBattery Pack to be Used Videocassette to be UsedCondensation occurs in the following cases Characteristic CCD Phe- nomenaCondensation Zoom Lens Th16 × 5.5BRMUFront Section 2PHONES Earphone jack Rear Section1Back tally lamp 3Shoulder belt hooksLCD Door Right Side Section ASTATUS Status/Menu button BGAIN Sensitivity selector switchCWHT.BAL White balance switch GHDV/DV LEDLeft Side Section EIEEE1394 IEEE1394 switch CGENLOCK/AUX in GENLOCK/AUX in switchDPBPR/TC PBPR/Time code switch GGENLOCK/AUX in GENLOCK/AUX in terminal BNCTop Section GFULL Auto Full auto shooting FAS switch DMONITOR Select Audio monitor selector switchFVTR VTR indicator LScrew holes for mounting accessoriesRecording and Image Out- put Formats Recording Composite RecordingIEEE1394 Indications on the LCD Monitor and in the View- finder Status ScreensStatus Screens in the Camera Mode Setting Status Contents of IndicationsContents Indications on the LCD Monitor and in the Viewfinder Cont’dTape time appears IDX Endura battery Voltage/remaining capacity %UB FF EE DD LCD/VF3/4 menu screen. X SeeFilter OFF ND1 CH-1O O O O O O O O O \ \ \CH-2O O O O O O O O O \ \ \ ND2Indication Indication Contents Video Format display Status Screen in VTR ModeHDV/DV input signal DoorNDF Magnified Status Indications on LCD MonitorEXT Safety Zone Indication Camera mode only Alarm Message DisplayMenu Setting Screen Center Mark OFF Switching between the LCD Screen and Viewfinder DisplaySafety Zone Basic System HZ-ZS13BAttaching the Microphone Provided How to Attach the View- finderAttaching the Zoom Lens Inserting an SD Memory Card Inserting an SD Memory CardTaking out the SD memory card About SD Memory CardsAttaching the Tripod Base Provided only for U model AC Operation Charging the Built-in BatteryHow to charge the built-in battery Removing the Battery Battery OperationAttaching the Battery „GY-HD250UOperating Time with Battery Pack Precautions for the Battery Opera- tionRemaining Battery Power Display Precautions for the Battery PackTurning the Power OFF Turning the Power onTurning the Power on Camera modeUnloading the Cassette Loading/Unloading the CassetteCassette Loading ModeSetting and Displaying the Date and Time Setting the Date and Time StyleDisplaying the Time and Date on the Screen Displaying Time Code Time code input entered the IEEE1394 connectorSetting Displayed Time Code/User’s BitDrop frame/Non-drop frame mode Presetting and Recording of Time CodeSetting DropZero-resetting the Time Code or User’s Bit Data Presetting time code dataPresetting user’s bit data Aborting Preset Operation Presetting the Time Code from the LCD ScreenPresetting User’s Bit OperationInternal About Time Code ModePlaying Back Time Code Slave unit GY-HD250U/GY-HD251E/GY-HD110U/GY- HD111E Settings and OperationsConnections Connection ExternalScreen Adjustment Viewfinder Adjustment Back Focus Adjustment Adjustment procedure White Balance AdjustmentWhite Balance Adjustment Error messagesWhite Shading Adjustment Setting the REC Item Setting the Video FormatSetting the Frame Rate Item ND Filter Camera SettingsScreen Size 43/169 Mode Selection Selecting the audio signal input Audio Input Signal Selec- tionSelecting the CH-2 channel input connector Adjusting Audio during RecordingMonitoring Audio during Recording LOW/MIDDLE/HIGHBasic Recording Opera- tion About the Focus Assist FunctionIf the Record-Standby Mode Contin- ues Header REC Function Record-Standby or Stop modeFunction/Initial Setting How to set the Header REC menu screen Executing the Header REC FunctionSearch Playback ProcedureFast-Forward, Rewind PB Audio CH DV Outputting AudioMIX Audio MonitorDisplaying Alarms Connecting the Video Signal CablesConnecting the IEEE1394 Cable Change 1394 SwitchRecording Composite Video Signals from an External Device Status Screen Display on the LCD Screen or ViewfinderAdjust SC and H Phase Using Genlock Func- tionsSynchronized Signals Dubbing with AV Devices HDV/DV Dubbing Videocassette you want to dubOFF Backup Recording SettingsShutter Speed in 24p Mode Connect a Remote Con- trol Unit RM-LP55/RM- LP57ALC+EEI Remote Control Unit Functions ListLolux Nega OFF/ON Shutter NormalMenu Screen Configura- tion Menu Screen Configuration Cont’d Setting Menu Screens TOP Menu Screen Video FORMAT1/2 Menu Screen Function/Setting bold characters indicate initial settingsSetting Description Letter Video FORMAT1/2 Menu Screen Cont’dNative Video FORMAT2/2 Menu Screen Terminal Setting B/P rInitial settings U model 7.5% E model 0.0% AutoMenu Screen 3200KMiddle HighNormal 108%Standard Stop RotationSkin Color DET Skin Color RangePreset White Balance Menu ScreenSwitch Mode Menu Screen REC Item Setting for Step Setting for Variable50dB AUDIO/MIC1/2 Menu Screen20dB 48KCH1/2 AUDIO/MIC2/2 Menu ScreenMIX Blue LCD/VF1/4 Menu Screen70-80% Image is displayed without inverting LCD Mirror ModeLCD/VF2/4 Menu Screen MirrorSEC LCD/VF3/4 Menu ScreenVoltage RGB LCD/VF4/4 Menu ScreenColor Drop TC/UB/CLOCK Menu ScreenInternal Disable Header REC Menu ScreenDATE+TIME TIME/DATE Menu ScreenBARS+CAM Variation Range U model MM/DD/YY E model DD/MM/YYBlink OTHERS1/2 Menu Screen3MIN OTHERS2/2 Menu Screen 1394DR-HD100 A.OFF Menu ALL ResetOTHERS2/2 Menu Screen Cont’d Drum HourGenlock Menu Screen SD H Phase *1HD H Phase SC Coarse *1File Manage Menu Screen Loading a menu settings file100 Displaying the File Manage menu screen101 Saving settingsError displays 102 Initializing formatting an SD mem- ory card103 How to Use Skin DetailSetting the skin detail function color and range 104 How to Use Skin Detail Cont’dUsing the Skin Detail Function Outputs multi-format color bars 105Outputting Color Bars 106 Display Status Action107 Error Code Error Details GY-HD250/GY-HD251 Remedy Operation 108Viewfinder Screen Blinking Pattern Remaining Battery/Tape109 Sound interrupted once per second110 TroubleshootingSymptoms Remedy RGB?How to Display the Hour Meter 111Specifications 112Excluding the CHU/CHE model External Dimensions unit mm113
Related manuals
Manual 12 pages 39.42 Kb
Top Page Image Contents