JVC GY-HD251, GY-HD250 manual Front Section

Page 15

e_hd250.book Page 11 Tuesday, October 24, 2006 3:11 PM

Front Section

3 2 1

4

5

8

7

6

6[ZEBRA] Zebra switch

When this switch is ON, a zebra pattern is imposed on the viewfinder or LCD areas having luminance levels in accor- dance with the menu settings made for the video signal. This pattern can be used as a reference for manual adjust- ment of the lens iris. Zebra patterns are also displayed during color bar display when this switch is set to ON.

•The default value is 70% - 80%. The luminance level can be changed with the ZEBRA setting in the LCD/

VF[1/4] menu screen. X See page 89.

While this switch is pressed to the SKIN AREA side, the color tone areas specified with the SKIN COLOR ADJUST item on the ADVANCED PROCESS menu are indicated in the viewfinder. The switch returns to the OFF position when released.

X See “How to Use Skin Detail” on page 103.

*The Skin Detail color tone areas are not indicated while the color bar or VTR playback picture is shown in the viewfinder or on the LCD monitor.

7[AWB] Auto white balance button

When the WHT.BAL switch c on page 15 is set to A or B and you press this button, the white balance is automati- cally adjusted.

*It is not activated in preset, full auto shooting, full auto white balance and color bar modes.

X See “White Balance Adjustment” on page 52.

1Shoe

Makes it possible to mount separately sold lights and accessories.

2Knob

This is the mounting knob for the microphone holder 3.

3Microphone holder

Makes it possible to attach the provided microphone or a separately sold microphone.

X See “Attaching

the

Microphone

(Provided)”

on page 33.

 

 

 

4Front tally lamp

This lamp lights up when the GY-HD250/GY-HD251 enters the record mode. It blinks during the transition to the record mode.

When the tape has run out, or the VTR enters the warning mode, it blinks quickly.

•Use the FRONT TALLY item on the OTHERS[1/2] menu screen to select whether or not the lamp should light and the lighting pattern.

X See page 96.

5[LENS] Lens control connector

Connect 12-pin lens control cable from lens here.

Pin

Function

Pin

Function

No.

No.

 

 

1

Return switch

7

Iris position

 

 

 

 

2

VTR trigger

8

IRIS A/R INPUT

 

 

 

 

3

GND

9

EXTENDER position

 

 

 

 

4

Lens AUTO/MANU con-

10

ZOOM position

 

trol

 

 

5

IRIS control

11

–

 

 

 

 

6

+12V DC

12

–

8Lens mounting ring/Lens lock lever

Hold the lens and use the lever to turn the ring anticlock- wise to release lens.

To mount lens make sure the lens guide pin fits well, and then turn the ring clockwise until firm.

X See “Attaching the Zoom Lens” on page 33.

11

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Victor Company of Japan, Limited LST0440-001B For Customer UseImportant Safeguards Remarque Safety PrecautionsPort Cable Length Safety Precautions Cont’dInformation for Users on Disposal Old Equipment European UnionBusiness users Other Countries outside the European Union HD251CHE Main Features Contents Playback Mode Precautions for Proper Use Periodical Maintenance Routine and Periodical MaintenancePrecautions for Use of Head Cleaning Tape Head CleaningVideocassette to be Used Battery Pack to be UsedCharacteristic CCD Phe- nomena CondensationCondensation occurs in the following cases Th16 × 5.5BRMU Zoom LensFront Section 3Shoulder belt hooks Rear Section1Back tally lamp 2PHONES Earphone jackLCD Door Right Side Section GHDV/DV LED BGAIN Sensitivity selector switchCWHT.BAL White balance switch ASTATUS Status/Menu buttonLeft Side Section GGENLOCK/AUX in GENLOCK/AUX in terminal BNC CGENLOCK/AUX in GENLOCK/AUX in switchDPBPR/TC PBPR/Time code switch EIEEE1394 IEEE1394 switchTop Section LScrew holes for mounting accessories DMONITOR Select Audio monitor selector switchFVTR VTR indicator GFULL Auto Full auto shooting FAS switchRecording and Image Out- put Formats Recording IEEE1394Recording Composite Status Screens Indications on the LCD Monitor and in the View- finderSetting Status Contents of Indications Status Screens in the Camera ModeIndications on the LCD Monitor and in the Viewfinder Cont’d ContentsLCD/VF3/4 menu screen. X See IDX Endura battery Voltage/remaining capacity %UB FF EE DD Tape time appearsND2 CH-1O O O O O O O O O \ \ \CH-2O O O O O O O O O \ \ \ Filter OFF ND1Indication Indication Contents Door Status Screen in VTR ModeHDV/DV input signal Video Format displayMagnified Status Indications on LCD Monitor EXTNDF Alarm Message Display Menu Setting ScreenSafety Zone Indication Camera mode only Switching between the LCD Screen and Viewfinder Display Safety ZoneCenter Mark OFF HZ-ZS13B Basic SystemHow to Attach the View- finder Attaching the Zoom LensAttaching the Microphone Provided About SD Memory Cards Inserting an SD Memory CardTaking out the SD memory card Inserting an SD Memory CardAttaching the Tripod Base Provided only for U model Charging the Built-in Battery How to charge the built-in batteryAC Operation „GY-HD250U Battery OperationAttaching the Battery Removing the BatteryPrecautions for the Battery Pack Precautions for the Battery Opera- tionRemaining Battery Power Display Operating Time with Battery PackCamera mode Turning the Power onTurning the Power on Turning the Power OFFMode Loading/Unloading the CassetteCassette Loading Unloading the CassetteSetting the Date and Time Style Setting and Displaying the Date and TimeDisplaying the Time and Date on the Screen Displayed Time Code/User’s Bit Time code input entered the IEEE1394 connectorSetting Displaying Time CodeDrop Presetting and Recording of Time CodeSetting Drop frame/Non-drop frame modePresetting time code data Presetting user’s bit dataZero-resetting the Time Code or User’s Bit Data Operation Presetting the Time Code from the LCD ScreenPresetting User’s Bit Aborting Preset OperationAbout Time Code Mode Playing Back Time CodeInternal Settings and Operations ConnectionsSlave unit GY-HD250U/GY-HD251E/GY-HD110U/GY- HD111E External ConnectionScreen Adjustment Viewfinder Adjustment Back Focus Adjustment Error messages White Balance AdjustmentWhite Balance Adjustment Adjustment procedureWhite Shading Adjustment Setting the Video Format Setting the Frame Rate ItemSetting the REC Item Camera Settings Screen Size 43/169 Mode SelectionND Filter Adjusting Audio during Recording Audio Input Signal Selec- tionSelecting the CH-2 channel input connector Selecting the audio signal inputLOW/MIDDLE/HIGH Monitoring Audio during RecordingAbout the Focus Assist Function Basic Recording Opera- tionIf the Record-Standby Mode Contin- ues Record-Standby or Stop mode Function/Initial SettingHeader REC Function Executing the Header REC Function How to set the Header REC menu screenPlayback Procedure Fast-Forward, RewindSearch Audio Monitor Outputting AudioMIX PB Audio CH DVChange 1394 Switch Connecting the Video Signal CablesConnecting the IEEE1394 Cable Displaying AlarmsStatus Screen Display on the LCD Screen or Viewfinder Recording Composite Video Signals from an External DeviceUsing Genlock Func- tions Synchronized SignalsAdjust SC and H Phase Dubbing with AV Devices Videocassette you want to dub HDV/DV DubbingOFF Settings Backup RecordingConnect a Remote Con- trol Unit RM-LP55/RM- LP57 Shutter Speed in 24p ModeNega OFF/ON Shutter Normal Remote Control Unit Functions ListLolux ALC+EEIMenu Screen Configura- tion Menu Screen Configuration Cont’d Setting Menu Screens TOP Menu Screen Function/Setting bold characters indicate initial settings Setting DescriptionVideo FORMAT1/2 Menu Screen Video FORMAT1/2 Menu Screen Cont’d NativeLetter Auto Terminal Setting B/P rInitial settings U model 7.5% E model 0.0% Video FORMAT2/2 Menu Screen3200K Menu ScreenHigh Middle108% NormalStandard Skin Color Range RotationSkin Color DET StopWhite Balance Menu Screen PresetREC Item Setting for Step Setting for Variable Switch Mode Menu Screen48K AUDIO/MIC1/2 Menu Screen20dB 50dBAUDIO/MIC2/2 Menu Screen MIXCH1/2 LCD/VF1/4 Menu Screen 70-80%Blue Mirror LCD Mirror ModeLCD/VF2/4 Menu Screen Image is displayed without invertingLCD/VF3/4 Menu Screen VoltageSEC LCD/VF4/4 Menu Screen ColorRGB TC/UB/CLOCK Menu Screen InternalDrop Header REC Menu Screen DisableVariation Range U model MM/DD/YY E model DD/MM/YY TIME/DATE Menu ScreenBARS+CAM DATE+TIMEOTHERS1/2 Menu Screen 3MINBlink 1394 OTHERS2/2 Menu ScreenDrum Hour Menu ALL ResetOTHERS2/2 Menu Screen Cont’d DR-HD100 A.OFFSC Coarse *1 SD H Phase *1HD H Phase Genlock Menu ScreenDisplaying the File Manage menu screen Loading a menu settings file100 File Manage Menu ScreenSaving settings Error displays101 Initializing formatting an SD mem- ory card 102How to Use Skin Detail Setting the skin detail function color and range103 How to Use Skin Detail Cont’d Using the Skin Detail Function104 105 Outputting Color BarsOutputs multi-format color bars Display Status Action 106107 108 Error Code Error Details GY-HD250/GY-HD251 Remedy OperationSound interrupted once per second Blinking Pattern Remaining Battery/Tape109 Viewfinder ScreenRGB? TroubleshootingSymptoms Remedy 110111 How to Display the Hour Meter112 SpecificationsExternal Dimensions unit mm 113Excluding the CHU/CHE model
Related manuals
Manual 12 pages 39.42 Kb
Top Page Image Contents