JVC GY-HD250, GY-HD251 manual Displaying the Time and Date on the Screen

Page 46
Time (Hour:Min)
1When the SHUTTER dial is pressed, the blinking digit moves to the next digit.
2When the SHUTTER dial is rotated, the value of the blinking digit changes.
When the SHUTTER dial is rotated upward, the value becomes higher. When rotated downward, the value becomes smaller.
3Repeat the procedure described in 1 and 2 above to set the day, month, year, hours, minutes.
The digits indicating seconds cannot be set.
4Press the SHUTTER dial in sync with a time signal to enter the date and time precisely.
3. When all the settings are completed, rotate the SHUT- TER dial to align the cursor with the PAGE BACK item, and then press the SHUTTER dial.
• The TIME/DATE menu screen returns.
4. To return to the normal screen, use either of the following methods.
Press the STATUS button or
Return to the TOP MENU screen and then select the EXIT item on the TOP MENU screen before pressing the SHUTTER dial.
42
Date
CLOCK ADJUST menu screen
The blinking digit is the one to be set.
time.
2. Set the date and
e_hd250.book Page 42 Tuesday, October 24, 2006 3:11 PM
PREPARATIONS FOR OPERATION
Setting and Displaying the Date and Time (Cont’d)
Setting the Date and Time
1. Display the CLOCK ADJUST menu screen.
Select the CLOCK ADJUST item on the TIME/DATE menu screen.
TIME/DATE menu screen

Displaying the Time and Date on the Screen

Whether or not the time and date should be displayed on the screen and how to display them are set on the TIME/DATE menu screen.

Date Time

1.Display the TIME/DATE menu screen.

1Select the TC/UB/CLOCK item on the TOP MENU screen.

2Select the TIME/DATE item on the TC/UB/CLOCK menu screen.

2.Set the TIME/DATE menu screen.

• DISPLAY item : Sets whether or not date and time should be displayed.

Set to ON to display the indications.

• DISPLAY MODE : Sets the video output mode in

itemwhich date and time should be dis- played.

BARS

: Displayed when outputting the color

 

bar.

CAM

: Displayed when outputting the color

 

camera image.

BARS+CAM

: Date and time are always displayed.

• DISPLAY

: Sets the style in which the date and

STYLE item

time are displayed.

DATE+TIME

: Date and time are displayed.

DATE

: Date only is displayed.

TIME

: Time only is displayed.

„Display of date and time in the various operation modes.

In Camera mode

: The date and time of the internal

 

clock are displayed.

In VTR playback mode : The date and time recorded on the tape are displayed.

In VTR stop mode

: The last read date and time values

 

are displayed.

When an HDV/DV sig- : The date and time of the DV input nal is input from the are displayed in DV format. The IEEE1394 connector date and time of the internal clock

are displayed in HDV format.

Page 45 Page 47
Image 46
Page 45 Page 47
Contents For Customer Use Victor Company of Japan, Limited LST0440-001BImportant Safeguards Safety Precautions RemarqueSafety Precautions Cont’d Port Cable LengthEuropean Union Information for Users on Disposal Old EquipmentBusiness users Other Countries outside the European Union HD251CHE Main Features Contents Playback Mode Precautions for Proper Use Head Cleaning Routine and Periodical MaintenancePrecautions for Use of Head Cleaning Tape Periodical MaintenanceBattery Pack to be Used Videocassette to be UsedCondensation Characteristic CCD Phe- nomenaCondensation occurs in the following cases Zoom Lens Th16 × 5.5BRMUFront Section 2PHONES Earphone jack Rear Section1Back tally lamp 3Shoulder belt hooksLCD Door Right Side Section ASTATUS Status/Menu button BGAIN Sensitivity selector switchCWHT.BAL White balance switch GHDV/DV LEDLeft Side Section EIEEE1394 IEEE1394 switch CGENLOCK/AUX in GENLOCK/AUX in switchDPBPR/TC PBPR/Time code switch GGENLOCK/AUX in GENLOCK/AUX in terminal BNCTop Section GFULL Auto Full auto shooting FAS switch DMONITOR Select Audio monitor selector switchFVTR VTR indicator LScrew holes for mounting accessoriesRecording and Image Out- put Formats IEEE1394 RecordingRecording Composite Indications on the LCD Monitor and in the View- finder Status ScreensStatus Screens in the Camera Mode Setting Status Contents of IndicationsContents Indications on the LCD Monitor and in the Viewfinder Cont’dTape time appears IDX Endura battery Voltage/remaining capacity %UB FF EE DD LCD/VF3/4 menu screen. X SeeFilter OFF ND1 CH-1O O O O O O O O O \ \ \CH-2O O O O O O O O O \ \ \ ND2Indication Indication Contents Video Format display Status Screen in VTR ModeHDV/DV input signal DoorEXT Magnified Status Indications on LCD MonitorNDF Menu Setting Screen Alarm Message DisplaySafety Zone Indication Camera mode only Safety Zone Switching between the LCD Screen and Viewfinder DisplayCenter Mark OFF Basic System HZ-ZS13BAttaching the Zoom Lens How to Attach the View- finderAttaching the Microphone Provided Inserting an SD Memory Card Inserting an SD Memory CardTaking out the SD memory card About SD Memory CardsAttaching the Tripod Base Provided only for U model How to charge the built-in battery Charging the Built-in BatteryAC Operation Removing the Battery Battery OperationAttaching the Battery „GY-HD250UOperating Time with Battery Pack Precautions for the Battery Opera- tionRemaining Battery Power Display Precautions for the Battery PackTurning the Power OFF Turning the Power onTurning the Power on Camera modeUnloading the Cassette Loading/Unloading the CassetteCassette Loading ModeSetting and Displaying the Date and Time Setting the Date and Time StyleDisplaying the Time and Date on the Screen Displaying Time Code Time code input entered the IEEE1394 connectorSetting Displayed Time Code/User’s BitDrop frame/Non-drop frame mode Presetting and Recording of Time CodeSetting DropPresetting user’s bit data Presetting time code dataZero-resetting the Time Code or User’s Bit Data Aborting Preset Operation Presetting the Time Code from the LCD ScreenPresetting User’s Bit OperationPlaying Back Time Code About Time Code ModeInternal Connections Settings and OperationsSlave unit GY-HD250U/GY-HD251E/GY-HD110U/GY- HD111E Connection ExternalScreen Adjustment Viewfinder Adjustment Back Focus Adjustment Adjustment procedure White Balance AdjustmentWhite Balance Adjustment Error messagesWhite Shading Adjustment Setting the Frame Rate Item Setting the Video FormatSetting the REC Item Screen Size 43/169 Mode Selection Camera SettingsND Filter Selecting the audio signal input Audio Input Signal Selec- tionSelecting the CH-2 channel input connector Adjusting Audio during RecordingMonitoring Audio during Recording LOW/MIDDLE/HIGHBasic Recording Opera- tion About the Focus Assist FunctionIf the Record-Standby Mode Contin- ues Function/Initial Setting Record-Standby or Stop modeHeader REC Function How to set the Header REC menu screen Executing the Header REC FunctionFast-Forward, Rewind Playback ProcedureSearch PB Audio CH DV Outputting AudioMIX Audio MonitorDisplaying Alarms Connecting the Video Signal CablesConnecting the IEEE1394 Cable Change 1394 SwitchRecording Composite Video Signals from an External Device Status Screen Display on the LCD Screen or ViewfinderSynchronized Signals Using Genlock Func- tionsAdjust SC and H Phase Dubbing with AV Devices HDV/DV Dubbing Videocassette you want to dubOFF Backup Recording SettingsShutter Speed in 24p Mode Connect a Remote Con- trol Unit RM-LP55/RM- LP57ALC+EEI Remote Control Unit Functions ListLolux Nega OFF/ON Shutter NormalMenu Screen Configura- tion Menu Screen Configuration Cont’d Setting Menu Screens TOP Menu Screen Setting Description Function/Setting bold characters indicate initial settingsVideo FORMAT1/2 Menu Screen Native Video FORMAT1/2 Menu Screen Cont’dLetter Video FORMAT2/2 Menu Screen Terminal Setting B/P rInitial settings U model 7.5% E model 0.0% AutoMenu Screen 3200KMiddle HighNormal 108%Standard Stop RotationSkin Color DET Skin Color RangePreset White Balance Menu ScreenSwitch Mode Menu Screen REC Item Setting for Step Setting for Variable50dB AUDIO/MIC1/2 Menu Screen20dB 48KMIX AUDIO/MIC2/2 Menu ScreenCH1/2 70-80% LCD/VF1/4 Menu ScreenBlue Image is displayed without inverting LCD Mirror ModeLCD/VF2/4 Menu Screen MirrorVoltage LCD/VF3/4 Menu ScreenSEC Color LCD/VF4/4 Menu ScreenRGB Internal TC/UB/CLOCK Menu ScreenDrop Disable Header REC Menu ScreenDATE+TIME TIME/DATE Menu ScreenBARS+CAM Variation Range U model MM/DD/YY E model DD/MM/YY3MIN OTHERS1/2 Menu ScreenBlink OTHERS2/2 Menu Screen 1394DR-HD100 A.OFF Menu ALL ResetOTHERS2/2 Menu Screen Cont’d Drum HourGenlock Menu Screen SD H Phase *1HD H Phase SC Coarse *1File Manage Menu Screen Loading a menu settings file100 Displaying the File Manage menu screenError displays Saving settings101 102 Initializing formatting an SD mem- ory cardSetting the skin detail function color and range How to Use Skin Detail103 Using the Skin Detail Function How to Use Skin Detail Cont’d104 Outputting Color Bars 105Outputs multi-format color bars 106 Display Status Action107 Error Code Error Details GY-HD250/GY-HD251 Remedy Operation 108Viewfinder Screen Blinking Pattern Remaining Battery/Tape109 Sound interrupted once per second110 TroubleshootingSymptoms Remedy RGB?How to Display the Hour Meter 111Specifications 112113 External Dimensions unit mmExcluding the CHU/CHE model
Related manuals
Manual 12 pages 39.42 Kb
Top Page Image Contents