JVC GY-HD251, GY-HD250 manual LCD/VF1/4 Menu Screen, 70-80%, Blue

e_hd250.book Page 89 Tuesday, October 24, 2006 3:11 PM

LCD/VF[1/4] Menu Screen

The LCD/VF menu screen consists of four screens. (1/4 screen, 2/4 screen, 3/4 screen, 4/4 screen)

The LCD/VF[1/4] menu screen can only be set in camera mode.

In VTR mode, this screen consists of two screens. (1/2 screen, 2/2 screen)

	Item			Function/Setting (bold characters indicate initial settings)
ZEBRA		Switches the luminance level of the subject sections where the zebra pattern is displayed.
		60-70%		: Zebra pattern is displayed in sections with luminance levels between 60% and 70%.
		70-80%		: Zebra pattern is displayed in sections with luminance levels between 70% and 80%.
		85-95%		: Zebra pattern is displayed in sections with luminance levels between 85% and 95%.
			OVER95%	: Zebra pattern is displayed in sections with luminance levels over 95%.
			OVER100%	: Zebra pattern is displayed in sections with luminance levels over 100%.
F. NO/IRIS IND.		Selects whether or not the F-number of the lens iris/iris level mark is displayed in the status display on the LCD mon-
			itor or in the viewfinder. (STATUS 1 screen)
			OFF	: F-number and iris level mark is not displayed.
			F.NO	: F-number is displayed.
			F.NO+IND.	: F-number and iris level mark is displayed.
FILTER			Selects whether or not the FILTER position of this device is displayed in the status display on the LCD monitor or in
			the viewfinder. (STATUS 1 screen)
			OFF	: FILTER position is not displayed.
			ON	: FILTER position is displayed.
SAFETY ZONE*1			Selects whether or not the safety zone is shown on the LCD monitor or in the viewfinder together with the form of
			the safety zone indication.
			OFF	: Not displayed.
		4:3		: 4:3 zone is displayed.
		14:9		: 14:9 zone is displayed.
		16:9		: 16:9 zone is displayed.
		16:9+4:3		: 16:9 zone and 4:3 zone are display mixed. (This cannot be selected when DV format is set.)
			2.35:1 CE	: Displays 2.35:1 zone in the middle of the screen.
				(Only in HDV format or 24P or 25P mode)
			2.35:1 CH	: Displays 2.35:1 zone at the top of the screen.
				(Only in HDV format or 24P or 25P mode)
CENTER MARK*1			Sets whether or not a center mark is displayed when the safety zone is displayed.
			ON	: Center mark is displayed.
			OFF	: Center mark is not displayed.
			MEMO
			When the SAFETY ZONE item is set to OFF, “- - -” is indicated and this item cannot be selected.
FOCUS ASSIST		Sets the FOCUS ASSIST function. Press the [FOCUS ASSIST] button on page 14 (6) or page 18 (7) to operate
			the FOCUS ASSIST function.
			NORMAL	: Only the [FOCUS ASSIST] function operates.
				(The focus area becomes blue, red or green, making it easier to focus.)
			ACCU-FOCUS	: The FOCUS ASSIST function and ACCU-FOCUS (forced focus) function operates.
				This makes the depth of field shallower, making it easier to focus. ACCU FOCUS automatically
				turns OFF after approximately 10 seconds.
	COLOR		Sets the display color for focusing when running the FOCUS ASSIST function.
			BLUE	: Displays the area of focus in blue.
			RED	: Displays the area of focus in red.
			GREEN	: Displays the area of focus in green.
	LEVEL	Sets the display range of the focal area when the FOCUS ASSIST function is in use.
			LOW	: Displays the focal area narrower than MIDDLE.
			MIDDLE	: Displays the focal area in normal setting.
			HIGH	: Displays the focal area wider than MIDDLE.
NEXT PAGE			When you display the LCD/VF[2/4] menu screen, move the cursor to this position and press the SHUTTER dial.
PAGE BACK		When the cursor is in this position, press the SHUTTER dial to return to the TOP MENU screen.

*1 SAFETY ZONE and CENTER MARK will not be displayed when this device is in VTR mode (PLAY, STL, FWD, REV).

89