JVC GY-HD251, GY-HD250 manual Monitoring Audio during Recording, Low/Middle/High

Page 61

e_hd250.book Page 57 Tuesday, October 24, 2006 3:11 PM

MEMO

•When AUDIO LIMITER in the AUDIO/MIC[1/2] menu screen is set to ON, the AUDIO LIMITER functions in manual adjust mode. Recording level is suppressed when excessive audio is input.

X See “AUDIO LIMITER” on page 87.

•The reference level for audio recorded on the tape can be set with the AUDIO REF. LEVEL item on the AUDIO/ MIC menu screen. (–20 dB or –12 dB) The level will change for both CH-1 and CH-2.

CAUTION

•When the AUDIO INPUT switch is set to MIC, be sure to check that the microphone is connected to the INPUT1/2 connector. If the microphone is not connected, increasing the audio level could cause noise from the input connector to be recorded on the tape. When the microphone is not con- nected to the INPUT1/2 connector, set the AUDIO INPUT switch to “LINE” or turn down the audio level control.

•In the FULL AUTO mode, the audio level volume cannot be adjusted with the audio level controls on the CH-1 and CH-2.

MEMO

•When connecting a stereotype earphone, make the fol- lowing settings to output stereo sound.

1Set the MONITOR SELECT switch to BOTH.

2Set the AUDIO MONITOR item on the AUDIO/MIC[2/2] menu screen to STEREO.

•When AUDIO MONITOR item on the AUDIO/MIC[2/2] menu screen is set to “STEREO”, only the audio of CH-1 is output from the monitoring speaker.

•The volume of the alarm tone is set with the ALARM VR LEVEL item on the OTHERS[1/2] menu screen. (OFF/

LOW/MIDDLE/HIGH)

Monitoring Audio during Recording

The audio input during recording, in record-pause or stop mode can be monitored through the monitoring speaker or earphone.

PHONES jack

•Select the audio channel to be monitored using the MONI- TOR SELECT switch.

CH-1 : The sound input to the CH-1 channel is output.

BOTH : The sound input to the CH-1 and CH-2 chan- nels is output mixed.

CH-2 : The sound input to the CH-2 channel is output.

•The MONITOR volume control adjusts the monitoring vol- ume.

•The loudspeaker or earphone outputs an alarm tone in the case of an abnormal condition occurring in this device. An alarm tone is also output when the tape end is reached or when the battery is running down.

*Do not increase the audio monitoring volume exces- sively; otherwise howling with the camera microphone may occur.

57

Image 61

Contents Victor Company of Japan, Limited LST0440-001B For Customer UseImportant Safeguards Remarque Safety PrecautionsPort Cable Length Safety Precautions Cont’dEuropean Union Information for Users on Disposal Old EquipmentBusiness users Other Countries outside the European Union HD251CHE Main Features Contents Playback Mode Precautions for Proper Use Precautions for Use of Head Cleaning Tape Routine and Periodical MaintenanceHead Cleaning Periodical MaintenanceVideocassette to be Used Battery Pack to be UsedCondensation Characteristic CCD Phe- nomenaCondensation occurs in the following cases Th16 × 5.5BRMU Zoom LensFront Section 1Back tally lamp Rear Section2PHONES Earphone jack 3Shoulder belt hooksLCD Door Right Side Section CWHT.BAL White balance switch BGAIN Sensitivity selector switchASTATUS Status/Menu button GHDV/DV LEDLeft Side Section DPBPR/TC PBPR/Time code switch CGENLOCK/AUX in GENLOCK/AUX in switchEIEEE1394 IEEE1394 switch GGENLOCK/AUX in GENLOCK/AUX in terminal BNCTop Section FVTR VTR indicator DMONITOR Select Audio monitor selector switchGFULL Auto Full auto shooting FAS switch LScrew holes for mounting accessoriesRecording and Image Out- put Formats IEEE1394 RecordingRecording Composite Status Screens Indications on the LCD Monitor and in the View- finderSetting Status Contents of Indications Status Screens in the Camera ModeIndications on the LCD Monitor and in the Viewfinder Cont’d ContentsUB FF EE DD IDX Endura battery Voltage/remaining capacity %Tape time appears LCD/VF3/4 menu screen. X SeeCH-2O O O O O O O O O \ \ \ CH-1O O O O O O O O O \ \ \Filter OFF ND1 ND2Indication Indication Contents HDV/DV input signal Status Screen in VTR ModeVideo Format display DoorEXT Magnified Status Indications on LCD MonitorNDF Menu Setting Screen Alarm Message DisplaySafety Zone Indication Camera mode only Safety Zone Switching between the LCD Screen and Viewfinder DisplayCenter Mark OFF HZ-ZS13B Basic SystemAttaching the Zoom Lens How to Attach the View- finderAttaching the Microphone Provided Taking out the SD memory card Inserting an SD Memory CardInserting an SD Memory Card About SD Memory CardsAttaching the Tripod Base Provided only for U model How to charge the built-in battery Charging the Built-in BatteryAC Operation Attaching the Battery Battery OperationRemoving the Battery „GY-HD250URemaining Battery Power Display Precautions for the Battery Opera- tionOperating Time with Battery Pack Precautions for the Battery PackTurning the Power on Turning the Power onTurning the Power OFF Camera modeCassette Loading Loading/Unloading the CassetteUnloading the Cassette ModeSetting the Date and Time Style Setting and Displaying the Date and TimeDisplaying the Time and Date on the Screen Setting Time code input entered the IEEE1394 connectorDisplaying Time Code Displayed Time Code/User’s BitSetting Presetting and Recording of Time CodeDrop frame/Non-drop frame mode DropPresetting user’s bit data Presetting time code dataZero-resetting the Time Code or User’s Bit Data Presetting User’s Bit Presetting the Time Code from the LCD ScreenAborting Preset Operation OperationPlaying Back Time Code About Time Code ModeInternal Connections Settings and OperationsSlave unit GY-HD250U/GY-HD251E/GY-HD110U/GY- HD111E External ConnectionScreen Adjustment Viewfinder Adjustment Back Focus Adjustment White Balance Adjustment White Balance AdjustmentAdjustment procedure Error messagesWhite Shading Adjustment Setting the Frame Rate Item Setting the Video FormatSetting the REC Item Screen Size 43/169 Mode Selection Camera SettingsND Filter Selecting the CH-2 channel input connector Audio Input Signal Selec- tionSelecting the audio signal input Adjusting Audio during RecordingLOW/MIDDLE/HIGH Monitoring Audio during RecordingAbout the Focus Assist Function Basic Recording Opera- tionIf the Record-Standby Mode Contin- ues Function/Initial Setting Record-Standby or Stop modeHeader REC Function Executing the Header REC Function How to set the Header REC menu screenFast-Forward, Rewind Playback ProcedureSearch MIX Outputting AudioPB Audio CH DV Audio MonitorConnecting the IEEE1394 Cable Connecting the Video Signal CablesDisplaying Alarms Change 1394 SwitchStatus Screen Display on the LCD Screen or Viewfinder Recording Composite Video Signals from an External DeviceSynchronized Signals Using Genlock Func- tionsAdjust SC and H Phase Dubbing with AV Devices Videocassette you want to dub HDV/DV DubbingOFF Settings Backup RecordingConnect a Remote Con- trol Unit RM-LP55/RM- LP57 Shutter Speed in 24p ModeLolux Remote Control Unit Functions ListALC+EEI Nega OFF/ON Shutter NormalMenu Screen Configura- tion Menu Screen Configuration Cont’d Setting Menu Screens TOP Menu Screen Setting Description Function/Setting bold characters indicate initial settingsVideo FORMAT1/2 Menu Screen Native Video FORMAT1/2 Menu Screen Cont’dLetter Initial settings U model 7.5% E model 0.0% Terminal Setting B/P rVideo FORMAT2/2 Menu Screen Auto3200K Menu ScreenHigh Middle108% NormalStandard Skin Color DET RotationStop Skin Color RangeWhite Balance Menu Screen PresetREC Item Setting for Step Setting for Variable Switch Mode Menu Screen20dB AUDIO/MIC1/2 Menu Screen50dB 48KMIX AUDIO/MIC2/2 Menu ScreenCH1/2 70-80% LCD/VF1/4 Menu ScreenBlue LCD/VF2/4 Menu Screen LCD Mirror ModeImage is displayed without inverting MirrorVoltage LCD/VF3/4 Menu ScreenSEC Color LCD/VF4/4 Menu ScreenRGB Internal TC/UB/CLOCK Menu ScreenDrop Header REC Menu Screen DisableBARS+CAM TIME/DATE Menu ScreenDATE+TIME Variation Range U model MM/DD/YY E model DD/MM/YY3MIN OTHERS1/2 Menu ScreenBlink 1394 OTHERS2/2 Menu ScreenOTHERS2/2 Menu Screen Cont’d Menu ALL ResetDR-HD100 A.OFF Drum HourHD H Phase SD H Phase *1Genlock Menu Screen SC Coarse *1100 Loading a menu settings fileFile Manage Menu Screen Displaying the File Manage menu screenError displays Saving settings101 Initializing formatting an SD mem- ory card 102Setting the skin detail function color and range How to Use Skin Detail103 Using the Skin Detail Function How to Use Skin Detail Cont’d104 Outputting Color Bars 105Outputs multi-format color bars Display Status Action 106107 108 Error Code Error Details GY-HD250/GY-HD251 Remedy Operation109 Blinking Pattern Remaining Battery/TapeViewfinder Screen Sound interrupted once per secondSymptoms Remedy Troubleshooting110 RGB?111 How to Display the Hour Meter112 Specifications113 External Dimensions unit mmExcluding the CHU/CHE model

Related manuals

Manual 12 pages 39.42 Kb