JVC GY-HD251, GY-HD250 manual Displaying Time Code, Displayed Time Code/User’s Bit, Setting

Page 47

e_hd250.book Page 43 Tuesday, October 24, 2006 3:11 PM

Displaying Time Code

The GY-HD250/GY-HD251 records SMPTE-standard (NTSC) or EBU-standard (PAL) time codes and user’s bits. In the play mode or the record mode, the reproduced time codes or user’s bits are shown on the LCD monitor or in the viewfinder.

•Time code generator data is output from the [TC OUT] ter- minal or [HD/SD-SDI] terminal.

The time codes or user’s bits can be shown on the LCD mon- itor or in the viewfinder during playback and recording as fol- lows. (Status screen)

Setting

1.Set the TC/UB item on the LCD/VF[3/4] menu screen to ON.

•Time codes or user’s bit data are displayed on the STATUS screen.

Time code indication

(Example)

Time code indication

00:00:00:00

User’s bits indication

FF EE DD 20

Displayed Time Code/User’s Bit

•When TCG SOURCE on the TC/UB/CLOCK menu screen is set to INTERNAL, values from the built-in time code generator is displayed.

•When TCG SOURCE on the TC/UB/CLOCK menu screen is set to EXTERNAL, values from the external time code generator connected to the [TC IN] terminal is displayed.

•When TC DUPLI. on the TC/UB/CLOCK menu screen is set to ON in IEEE1394 input mode, values input in the [IEEE1394] terminal is displayed.

•Values recorded on the tape are displayed for PLAY mode.

Time code input entered the IEEE1394 connector

Pressing the STOP button for 1 second in the EJECT or stop mode displays the DV input time code data or user’s bit data from the IEEE1394 connector on the STATUS screen.

DTCG : The time code data from the IEEE1394 connector

DUBG : The user’s bit data from the IEEE1394 connector

To return to display of the original time code or user’s bit, press the STOP button. (Display of the normal time code or user’s bit is also restored by performing VTR operation.)

STATUS 1 screen

2.Whether time codes or user’s bit data should be dis- played is selected with the TC DISPLAY switch inside the LCD door.

TC

: Time codes are displayed.

UB

: User’s bit data is displayed.

LCD BRIGHT

 

CAM/VTR

-

+

 

 

 

AUDIO SELECT

 

TC

CH-1

CH-2

DISPLAY

GENE.

 

AUTO

TC

FREE

 

MANU

UB

REC

 

 

 

REGEN

MEMO

•To use input time code data from the IEEE1394 terminal, set TCG SOURCE item on the TC/UB/CLOCK menu screen to INTERNAL.

•To record HDV/DV input time code and user’s bit from the IEEE1394 connector, set the TC DUPLI. item on the TC/UB/CLOCK menu screen to ON.

X See page 93.

•To maintain the continuity of time code data, use with the TC GENE. switch set to REGEN mode when recording HDV/DV input signal from the IEEE1394 connector.

•There is no time code display for HDV input.

CAUTION

A time code with a duration of more than 2 hours may not be displayed correctly by DV components for general con- sumer use, as some of these lack the capability to display longer time codes.

TC DISPLAY switch TC GENE. switch

43

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Victor Company of Japan, Limited LST0440-001B For Customer UseImportant Safeguards Remarque Safety PrecautionsPort Cable Length Safety Precautions Cont’dBusiness users Other Countries outside the European Union Information for Users on Disposal Old EquipmentEuropean Union HD251CHE Main Features Contents Playback Mode Precautions for Proper Use Periodical Maintenance Routine and Periodical MaintenancePrecautions for Use of Head Cleaning Tape Head CleaningVideocassette to be Used Battery Pack to be UsedCondensation occurs in the following cases Characteristic CCD Phe- nomenaCondensation Th16 × 5.5BRMU Zoom LensFront Section 3Shoulder belt hooks Rear Section1Back tally lamp 2PHONES Earphone jackLCD Door Right Side Section GHDV/DV LED BGAIN Sensitivity selector switchCWHT.BAL White balance switch ASTATUS Status/Menu buttonLeft Side Section GGENLOCK/AUX in GENLOCK/AUX in terminal BNC CGENLOCK/AUX in GENLOCK/AUX in switchDPBPR/TC PBPR/Time code switch EIEEE1394 IEEE1394 switchTop Section LScrew holes for mounting accessories DMONITOR Select Audio monitor selector switchFVTR VTR indicator GFULL Auto Full auto shooting FAS switchRecording and Image Out- put Formats Recording Composite RecordingIEEE1394 Status Screens Indications on the LCD Monitor and in the View- finderSetting Status Contents of Indications Status Screens in the Camera ModeIndications on the LCD Monitor and in the Viewfinder Cont’d ContentsLCD/VF3/4 menu screen. X See IDX Endura battery Voltage/remaining capacity %UB FF EE DD Tape time appearsND2 CH-1O O O O O O O O O \ \ \CH-2O O O O O O O O O \ \ \ Filter OFF ND1Indication Indication Contents Door Status Screen in VTR ModeHDV/DV input signal Video Format displayNDF Magnified Status Indications on LCD MonitorEXT Safety Zone Indication Camera mode only Alarm Message DisplayMenu Setting Screen Center Mark OFF Switching between the LCD Screen and Viewfinder DisplaySafety Zone HZ-ZS13B Basic SystemAttaching the Microphone Provided How to Attach the View- finderAttaching the Zoom Lens About SD Memory Cards Inserting an SD Memory CardTaking out the SD memory card Inserting an SD Memory CardAttaching the Tripod Base Provided only for U model AC Operation Charging the Built-in BatteryHow to charge the built-in battery „GY-HD250U Battery OperationAttaching the Battery Removing the BatteryPrecautions for the Battery Pack Precautions for the Battery Opera- tionRemaining Battery Power Display Operating Time with Battery PackCamera mode Turning the Power onTurning the Power on Turning the Power OFFMode Loading/Unloading the CassetteCassette Loading Unloading the CassetteSetting the Date and Time Style Setting and Displaying the Date and TimeDisplaying the Time and Date on the Screen Displayed Time Code/User’s Bit Time code input entered the IEEE1394 connectorSetting Displaying Time CodeDrop Presetting and Recording of Time CodeSetting Drop frame/Non-drop frame modeZero-resetting the Time Code or User’s Bit Data Presetting time code dataPresetting user’s bit data Operation Presetting the Time Code from the LCD ScreenPresetting User’s Bit Aborting Preset OperationInternal About Time Code ModePlaying Back Time Code Slave unit GY-HD250U/GY-HD251E/GY-HD110U/GY- HD111E Settings and OperationsConnections External ConnectionScreen Adjustment Viewfinder Adjustment Back Focus Adjustment Error messages White Balance AdjustmentWhite Balance Adjustment Adjustment procedureWhite Shading Adjustment Setting the REC Item Setting the Video FormatSetting the Frame Rate Item ND Filter Camera SettingsScreen Size 43/169 Mode Selection Adjusting Audio during Recording Audio Input Signal Selec- tionSelecting the CH-2 channel input connector Selecting the audio signal inputLOW/MIDDLE/HIGH Monitoring Audio during RecordingAbout the Focus Assist Function Basic Recording Opera- tionIf the Record-Standby Mode Contin- ues Header REC Function Record-Standby or Stop modeFunction/Initial Setting Executing the Header REC Function How to set the Header REC menu screenSearch Playback ProcedureFast-Forward, Rewind Audio Monitor Outputting AudioMIX PB Audio CH DVChange 1394 Switch Connecting the Video Signal CablesConnecting the IEEE1394 Cable Displaying AlarmsStatus Screen Display on the LCD Screen or Viewfinder Recording Composite Video Signals from an External DeviceAdjust SC and H Phase Using Genlock Func- tionsSynchronized Signals Dubbing with AV Devices Videocassette you want to dub HDV/DV DubbingOFF Settings Backup RecordingConnect a Remote Con- trol Unit RM-LP55/RM- LP57 Shutter Speed in 24p ModeNega OFF/ON Shutter Normal Remote Control Unit Functions ListLolux ALC+EEIMenu Screen Configura- tion Menu Screen Configuration Cont’d Setting Menu Screens TOP Menu Screen Video FORMAT1/2 Menu Screen Function/Setting bold characters indicate initial settingsSetting Description Letter Video FORMAT1/2 Menu Screen Cont’dNative Auto Terminal Setting B/P rInitial settings U model 7.5% E model 0.0% Video FORMAT2/2 Menu Screen3200K Menu ScreenHigh Middle108% NormalStandard Skin Color Range RotationSkin Color DET StopWhite Balance Menu Screen PresetREC Item Setting for Step Setting for Variable Switch Mode Menu Screen48K AUDIO/MIC1/2 Menu Screen20dB 50dBCH1/2 AUDIO/MIC2/2 Menu ScreenMIX Blue LCD/VF1/4 Menu Screen70-80% Mirror LCD Mirror ModeLCD/VF2/4 Menu Screen Image is displayed without invertingSEC LCD/VF3/4 Menu ScreenVoltage RGB LCD/VF4/4 Menu ScreenColor Drop TC/UB/CLOCK Menu ScreenInternal Header REC Menu Screen DisableVariation Range U model MM/DD/YY E model DD/MM/YY TIME/DATE Menu ScreenBARS+CAM DATE+TIMEBlink OTHERS1/2 Menu Screen3MIN 1394 OTHERS2/2 Menu ScreenDrum Hour Menu ALL ResetOTHERS2/2 Menu Screen Cont’d DR-HD100 A.OFFSC Coarse *1 SD H Phase *1HD H Phase Genlock Menu ScreenDisplaying the File Manage menu screen Loading a menu settings file100 File Manage Menu Screen101 Saving settingsError displays Initializing formatting an SD mem- ory card 102103 How to Use Skin DetailSetting the skin detail function color and range 104 How to Use Skin Detail Cont’dUsing the Skin Detail Function Outputs multi-format color bars 105Outputting Color Bars Display Status Action 106107 108 Error Code Error Details GY-HD250/GY-HD251 Remedy OperationSound interrupted once per second Blinking Pattern Remaining Battery/Tape109 Viewfinder ScreenRGB? TroubleshootingSymptoms Remedy 110111 How to Display the Hour Meter112 SpecificationsExcluding the CHU/CHE model External Dimensions unit mm113
Related manuals
Manual 12 pages 39.42 Kb
Top Page Image Contents