JVC GY-HD250, GY-HD251 Status Screen in VTR Mode, Video Format display, HDV/DV input signal, Door

e_hd250.book Page 28 Tuesday, October 24, 2006 3:11 PM

CONTROLS, INDICATORS AND CONNECTORS

Indications on the LCD Monitor and in the Viewfinder (Cont’d)

Status Screen in VTR MODE

1	2
	3
4
5	0
6	9
7	8

No.	Item	Contents
1	VIDEO FORMAT display	Displays the video format recorded on the tape when in VTR mode. Also displays the video format of the
		HDV/DV input signal.
		You can switch this display ON/OFF using the VIDEO FORMAT item on the LCD/VF[1/2] menu screen.
		X See page 91.
2	Time code (TC) and user’s bits	Displays the time code data being recorded (hour, minute, second, frame) when in VTR mode.
	(UB) display	You can switch this display ON/OFF using the TC/UB item on the LCD/VF[1/2] menu screen.
		X See page 91.
		You can select to display either the time code or the user’s bits using the TC DISPLAY switch in the LCD
		door.
3	Remaining tape time	Remaining tape indication (displayed in 1-minute steps)
		This indicator blinks when remaining tape time is equivalent to less than 3 minutes.
		Whether or not to display this item is set with the TAPE REMAIN item on the LCD/VF[1/2] menu screen.
		X See page 91.
		* When inserting a brand-new tape, the remaining tape time is not indicated.
		When the tape has been run, the indication will appear.
		* The remaining tape indication is to be used only as a guide.
		* When this device is used at low temperatures, it may take a while before the indication of the remaining
		tape time appears.
4	Event display	Displays messages related to VTR operations. X See pages 106-108.
5	Audio sampling frequency in-	The audio sampling frequency used for the recording is displayed during playback.
	dication	(32 K, 48 K, 44.1 K)
		Whether or not to display this item is set with the AUDIO item on the LCD/VF[1/2] menu screen.
		X See page 91.
6	Audio level meter indication	Displays the audio level meters during playback.
		Whether or not to display this item is set with the AUDIO item on the LCD/VF[1/2] menu screen.
		X See page 91.
7	VTR mode indication	Indicates the VTR operation status
		STBY, STOP, PLAY, REC, FF, REW, FWD, REV, STL, - - - (No tape loaded), SLOW: During variable play-
		back in forward direction (Displayed when using non-linear editing software.)
		(SLOW+1: About ×0.1 speed, SLOW+2: About ×0.2 speed, SLOW+3: About ×0.5 speed)
		During variable playback in reverse direction (Displayed when using non-linear editing software.)
		(SLOW–1: About ×–0.1 speed, SLOW–2: About ×–0.2 speed, SLOW–3: About ×–0.5 speed)

28