Prescan

This section describes the procedure for checking a scanned image and adjusting the brightness and contrast accordingly.

1Click the [Others] tab in the Properties for Canon DR-3010C dialog box select the [Prescan] check box click [OK].

3Check the preview image displayed in the Prescan window adjust [Brightness] and [Contrast] as necessary using the sliders or up/down buttons click (Start) to save the scanned image.

2From the [Scan] menu, select [Scan Batch to File]. Specify the location, file name, and file format to save the image click [Save] to start scanning.

NOTE

The Prescan window is for scanning after adjusting the brightness and contrast, according to the scanned results of the first document. You can enlarge the image displayed in the Prescan window. (Left-click the image displayed in the window to enlarge it, and right-click the image displayed in the window to reduce it.)

If you change the brightness and contrast values, the image displayed in the window reflects these new values. Click the Start button to start scanning with the adjusted brightness and contrast. Click the Stop button to stop scanning.

When scanning is complete, the Prescan window is displayed.

54

DR-3010C

Page 54
Image 54
Canon DR-3010C user manual When scanning is complete, the Prescan window is displayed