Canon DR-3010C user manual Paper Size Settings, Mode in case of binary, Brightness, Contrast

yColor Saturation: Adjust the setting towards <High> when you want to scan a color document with low color saturation as a black-and-white document.

yProportion of Color: Adjust the setting towards <High> when you want to scan a color document with a low proportion of color as a black-and-white document.

-[Mode in case of binary]

Select the scanning mode when a page is detected as black-and-white.

-[Brightness]

This setting adjusts the brightness when [Advanced Text Enhancement] or [Advanced Text Enhancement II] is selected from the Mode drop-down list. For other modes, the brightness is set from the [Brightness] tab.

-[Contrast]

This setting adjusts the contrast when [Advanced Text Enhancement II] is selected from the Mode drop-down list. For other modes, the contrast is set from the [Brightness] tab.

Paper Size Settings

This section describes the procedure for selecting the size for scanning.

1Click the [Basic] tab in the Properties for Canon DR-3010C dialog box → select the page size from the Page Size drop-down list → click [OK].

NOTE

• Click [Auto-detection] to scan the following kinds of documents: - Documents of undetermined size

- Documents including mixed page sizes

- When using the Long Document mode (See "Setting the Long Document Mode," on p.36.)

• When [Auto-detection] is selected, the Area setting from the Scan Area dialog box is disabled.

• Depending on the application, the operation may become unstable when [Auto- detection] is enabled. In this case, [Auto-detection] should be disabled.

42 DR-3010C