Canon DR-3010C Other Functions, Setting the Long Document Mode, Control Panel Classic View

7. Other Functions

Setting the Long Document Mode

The length of documents that can be scanned with the DR-3010C is normally 14.02" (356 mm), but you can scan documents up to 39.2" (1,000 mm) long by setting the scanner to the Long Document mode.

IMPORTANT

When scanning in the Long Document mode, click the [Basic] tab in the Properties for Canon DR-3010C dialog box → select [Auto-detection] from the Page Size drop-down list → click [OK]. This allows the scanner to detect and scan documents up to 39.2" (1,000 mm) long. Note the following when using the Long Document mode:

•When scanning long documents, make sure to set the feed selection lever to

(Bypass), and scan the documents one at a time.

•When scanning in the Long Document mode, if the document is placed on the scanner in a skewed position, it may hit the edges of the feeding area and be damaged. Be careful to place the document so that it is not skewed.

•When scanning in the Long Document mode, paper jam detection may react slowly, resulting in damage to the document. Be careful to avoid paper jams.

1From the Windows task bar, click [Start] → [Control Panel].

2If the Control Panel is displayed with the Category View, click [Printers and Other Hardware] in the working field → click [Scanners and Cameras].

If the Control Panel is displayed with the Classic View, double-click [Scanners and Cameras].

Control Panel (Category View) Printers and Other Hardware

Control Panel (Classic View)

3Right-click [CANON DR-3010C USB] → click [Properties].

36 DR-3010C