Chapter 5 Setting the Pedal Functions (Pedal Assign)
These settings can be saved separately to individual
patches.
Selecting Each Effect to Be Turned On and Off with the Number Pedals
You can change the effects that are turned on and off with
the number pedals
1.Press PARAMETER [ 
] [ 
] in the Play screen to
display the following screen.
2.Press PARAMETER [ 
] [ 
] to move the cursor, and turn the PATCH/VALUE dial to select the effect to be assigned to the pedal.
The effects that can be assigned to each pedal are shown below.
Number 1: COMP/LIMITER or WAH
Number 2: OD/DIST or
Number 3: CHORUS or
Number 4: This pedal is a dedicated PEV/DLY pedal. However, when selecting Sound On Sound with the REV/DLY FX Select (p. 27), the Sound On Sound control function is automatically assigned to this pedal and the CTL pedal. Refer to p. 54 for more information when using this function.
*The name and on/off status of the selected effect appear in the display in capitals when the effect is on, and in lowercase when the effect is off.
*Each of the effect names indicated in the display are the actual effect names as selected with FX Select and other controls.
3.To save the settings, perform the Write procedure (p. 23). Press [EXIT] to return to the Play screen.
Settings for Using the
Expression Pedal
Normally, “FV” (Foot Volume) is assigned to the expression pedal, allowing it to be used as a “volume pedal” to control the volume level.
*When bypass is in effect, you may be unable to control the volume level with the expression pedal. In such instances, set Bypass EXP Mode to “On” (p. 55).
Setting the Range of the Volume Change
You can set the minimum and maximum values determining the range over which the volume level changes when you move the expression pedal.
1.Press [PEDAL ASSIGN].
2.Press PARAMETER [ 
] [ 
] to display the following screen.
(Setting the minimum value)
(Setting the maximum value)
3.Rotate the PATCH/VALUE dial to set the value. Values:
4.To save the settings, perform the Write procedure (p. 23). Press [EXIT] to return to the Play screen.
When “WAH” (Pedal Wah: p. 20, 31) or
(Pedal Bend: p. 20, 38) is on, the expression pedal automatically functions as a “pedal wah” or “pedal bend.”
*When these are off, the expression pedal automatically functions as a “volume pedal.”
Chapter 5
45
