Chapter 5 Setting the Pedal Functions (Pedal Assign)

(Expression pedal switch)

(CTL pedal)

Holding down [ ] (or [ ]) and pressing [ ]

(or [ ]) causes the GT-6B to jump to the main screen, allowing you to reduce the number of times you need to press the buttons.

3.Rotate the PATCH/VALUE dial to select the pedal setting.

4.Repeat steps 2–3 as necessary.

5.To save the settings, use the Write procedure (p. 23). Press [EXIT] to return to the Play screen.

If You Don’t Want to Use the Expression Pedal Switch or CTL Pedal

1.Press [PEDAL ASSIGN].

2.Press PARAMETER [ ] [ ] to display the following screens.

(Expression pedal switch)

(CTL pedal)

3.Press [PEDAL ASSIGN] once more, to set it to “Off.”

4.To save the settings, perform the Write procedure (p. 23). Press [EXIT] to return to the Play screen.

Editing “Quick Settings”

Whenever necessary, you can edit parameter values set in the

Quick Settings.

1.Press [PEDAL ASSIGN].

2.Press PARAMETER [ ] [ ] to display the following screen.

Expression Pedal Switch

Target

Expression Pedal Switch

Target value range: Min

Expression Pedal Switch

Target value range: Max

Expression Pedal Switch

Source Mode

CTL Pedal

Target

CTL Pedal

Target value range: Min

CTL Pedal

Target value range: Max

CTL Pedal

Source Mode

3.Rotate the PATCH/VALUE dial to change the setting value.

4.Repeat steps 2–3 as necessary.

5.To save the settings, use the Write procedure (p. 23). Press [EXIT] to return to the Play screen.

Target

Select the parameters to be controlled.

Target Variation Range

This sets the range within which the parameter being controlled can be changed.

The range between the minimum value (Min) and the maximum value (Max) is changed.

Source Mode

This selects the function of the foot switch (p. 50).

Chapter 5

47

Page 47
Image 47
Boss Audio Systems GT-6B owner manual Editing Quick Settings, Target Variation Range, Source Mode