Boss Audio Systems GT-6B Press the ON/OFF button for the effect with, Press Parameter To select

Chapter 2 Creating You Own Favorite Tones (Patches)

Setting the Effect Tones	Making More Detailed Settings
(Quick Settings)	with Individual Parameters
Quick Settings are preprogrammed effect settings. Each	The effects include extra parameters in addition to those that
effect in the GT-6B has some available quick settings. You	can be adjusted directly with the knobs.
can easily create new effect sounds, without having to make	You can more precisely create the sounds you want by
any detailed adjustments, just by selecting and combining	editing each of these parameters individually.
these Quick Settings.
3	3

2 2

									6
						1
	1			4
1.					1. Press the ON/OFF button for the effect with the
	Press the ON/OFF button for the effect with the					settings you want to change.
	settings you want to change.					The parameters for the selected effect appear in the
	The parameters for the selected effect appear in the					display.
	display.				2.	Press PARAMETER [	] [	] to select the
*	During editing, the most recently edited parameter for each
						parameter whose settings are to be changed.
	effect is indicated in the display.
						When more than one parameter is shown in the display,
2.	Press PARAMETER [	] [	] to display the			press PARAMETER [	] [	] to move the cursor to
	“Quick Setting--.”					the parameter to be set.
						You can jump to the most important parameters by
						pressing PARAMETER [	] (or [		]) while holding
						down PARAMETER [	] (or [		]). With items for
3.	Rotate the VALUE dial to select the effect setting you					which there aren’t that many parameters, the GT-6B
	want.					jumps to the last (or first) parameter.
*	When you press [FX-1], [FX-2], or [WAH] in Step 1, the				3.	Rotate the VALUE dial to change the settings value.
	settings for the effect selected by means of the FX Select				4. Repeat Steps 2 and 3 for any other parameter settings
	parameter (refer to the following item) are switched.
						you want to change.

4.Press [EXIT] to return to the Play screen.

5. If you want to change parameter settings in any other effects, repeat Steps 1 through 4.

6. Press [EXIT] to return to the Play screen.

If you want to save a tone for which you have made settings, use the Write procedure (p. 23) to save the tone to a User patch.

Chapter 2

19