Boss Audio Systems GT-6B Making Custom Pedal Wah Settings, Using the Customize Function

Chapter 6 Using the Customize Function

Making “Custom” Pedal Wah Settings

Here, you can make three different sets of settings, Custom 1, Custom 2, and Custom 3.

*Editing the Custom 1, 2, or 3 settings alters all tones in patches that use these custom settings.

1.Press [WAH].

The WAH edit screen appears.

2.Press PARAMETER [ ] [ ] so that “FX Select” is displayed, then rotate the PATCH/VALUE dial to select “WH.”

3.Press PARAMETER [ ] [ ] until “Type” appears in the display.

4.Rotate the PATCH/VALUE dial to select from “Custom 1–3.”

5.Press PARAMETER [ ] [ ] to show the custom parameters.

Custom

Type

Custom

Q

Custom

Range Low

Custom

Range High

Custom

Presence

6.Rotate the PATCH/VALUE dial to change the setting value.

7.Repeat Steps 4 through 6 as needed.

8.Press [EXIT] to return to the Play screen.

Type

Selects the basic type of wah.

CRY WAH:

This models the ‘70s-type sound of the CRY BABY wah pedal.

VO WAH:

This models the sound of the VOX V846.

Bass WAH:

Wah featuring a broader range of variations for the bass range.

Q -50–+50

Adjusts the amount of characteristic effect applied to the wah tone.

Range Low -50–+50

Selects the tone produced when the pedal is rocked back.

Range High -50–+50

Selects the tone produced when the pedal is pressed fully forward.

Presence -50–+50

Adjusts the tonal quality of the wah effect.

Chapter 6

53