Boss Audio Systems GT-6B Adding and Omitting Effects, Repeat Steps 1, Switch on and off

Chapter 2 Creating You Own Favorite Tones (Patches)

Adding and Omitting Effects	3. To select another effect to be switched on and off,
		repeat Steps 1 and 2.
You can switch the internal effects on and off, which lets you
	4. Press [EXIT] to return to the Play screen.
change tones by adding and omitting effects.
Using the Buttons to Switch	Switching Effects with the Pedals
Effects On and Off	The GT-6B is set at the factory so that you can use Pedals “1”
	through “4” to switch specific effects on and off. The names
You can switch each of the internal effects on and off with the	of effects that can be controlled with these pedals appear in
respective effect ON/OFF button.	the lower row of the display.
	* The effects that can controlled can be selected individually for
		each patch (p. 45).

1,2,3 4

1. Press the ON/OFF button for the effect you want to be		1
able to switch on and off.	1.
The effect's name and on/off status appear in the display.		Press the pedal corresponding to the effect you want to
		switch on and off.
The indicator for an effect’s ON/OFF button lights up
		Each time you press the pedal, the effect is alternately
when the effect is enabled, and flashes when that effect is
		turned on or off, and the pedal indicator lights up or
disabled.
		goes out.
	*	While enabled, effects are indicated in capital letters in the
		display; disabled effects are indicated in lowercase letters.

2.Press the ON/OFF button again to switch the effect on or off, changing the indicator light status.

* The PREAMP turns on automatically when the SPEAKER is
		Effects
turned on. Additionally, turning off the SPEAKER
automatically turns off the PREAMP.
* As set at the factory, the indicator for the pedal corresponding	If you want to save a tone for which you have made
	settings, use the Write procedure (p. 23) to save the tone
to the effect being used also lights up and goes out in response
	to a User patch.
to the effect status.

*The effect name flashes in the display when that effect is turned off.

*When you press [FX-1], [FX-2], or [WAH] in Step 1, the effect set with the FX Select parameter (“Making More Detailed Settings with Individual Parameters,” see p. 19) is switched on and off.

18